Publication Search

Neonatal maternal emergencies are a contributing cause of maternal mortality, including hypertension disorders, namely preeclampsia/eclampsia (33.07%), obstetric hemorrhage (27.03%), other obstetric complications 12.04%, infections in pregnancy (6.06%) (Indonesian Ministry of Health, 2019). Maternal mortality and morbidity can actually be reduced or prevented with various improvements in the field of obstetric health services. In Indonesia, obstetric emergency problems occur due to four delays, namely being late in recognizing danger signs and risks, being late in making a decision to seek help, being late in getting transportation to reach a more capable health service facility, and being late in getting help at a referral facility. Bangun Rejo Village is one of the villages in the Tanjung Morawa Community Health Center which has the highest risk of pregnant women compared to other villages. Involvement in decision making regarding referrals is still predominantly obtained from the family, so that family knowledge regarding emergency problems and pregnancy complications experienced by the mother greatly influences the accuracy of decision making to refer/contact a midwife/health worker so that treatment can be obtained more quickly. This activity aims to increase the knowledge of health workers, namely village midwives and cadres, in providing excellent maternal and neonatal emergency services in Bangun Rejo Village. This activity was attended by 9 midwives and 11 cadres from 11 hamlets in Bnagun Rejo Village. The results of this activity were that there was an increase in partners' knowledge before and after the intervention in the "good" category, which increased by 53% and in the "poor" category, which decreased by 53%. The initial pretest score was 45% which increased in the post test to 98%.  It is necessary to increase the knowledge and abilities of village midwives and cadres in Bnagun Rejo Village regarding maternal and neonatal emergency services.

Law No. 19 of 2013 on the Protection and Empowerment of Farmers aims to improve farmers' welfare through various programs, including fertilizer subsidies. However, the distribution of subsidized fertilizers often faces issues such as misallocation, delays, and misuse. The Farmer Card (Kartu Tani), an innovation to facilitate the distribution of subsidized fertilizers, has significant potential to address these problems. This study aims to evaluate the effectiveness of the Farmer Card in the distribution of subsidized fertilizers, identify the challenges faced by farmers in its use, and propose solutions for the optimization of the Farmer Card. Using a descriptive qualitative approach through literature review, this study finds that the main challenges include technical issues, lack of socialization, bureaucratic hurdles, and farmers' distrust of new technology. Proposed solutions include enhancing technological infrastructure, providing intensive training for farmers, and simplifying administrative procedures. The study's results indicate that improvements in these aspects can enhance the effectiveness and transparency of subsidized fertilizer distribution through the Farmer Card.

Hypothermia is a common complication following spinal anesthesia, which can lead to more severe consequences if not detected and treated early. Early detection of hypothermia is essential for preventing additional complications, such as cardiovascular instability, delayed recovery, or prolonged hospitalization. This study aims to analyze the effectiveness of providing health education in improving the early detection of hypothermia among patients after spinal anesthesia at Gemolong Regional Hospital. The research utilized a quantitative approach, applying a pre-experimental one-group pre-test and post-test design to measure the impact of the intervention. A total of 15 patients who underwent spinal anesthesia were selected as respondents and were provided with health education on recognizing the signs, risks, prevention, and treatment of hypothermia. Health education sessions were conducted through interactive presentations and written materials, emphasizing practical knowledge that could be directly applied by healthcare staff and patients. The primary data collection tool involved pre-test and post-test assessments to measure the participants' understanding of hypothermia and its management. The results indicated a significant improvement in the patients' understanding of hypothermia after receiving the health education. The average score of the post-test was noticeably higher than the pre-test, suggesting that the education effectively increased awareness and preparedness for early detection of hypothermia. This finding emphasizes the importance of integrating health education programs into clinical practice, especially for patients undergoing spinal anesthesia, to enhance early detection and reduce the risks of complications related to hypothermia.

The purpose of this research is to determine strategies for addressing the delays in the arrival and departure times of KM Umsini and KM Dobonsolo owned by PT. Pelni (Persero) at the Port of Makassar based on SWOT analysis recommendations. The data processed includes qualitative data on estimated arrival times compared to the actual arrival times of the vessels, as well as estimated departure times compared to the actual departure times. The results show that the average delay in the arrival of KM Dobonsolo is 1 hour and 18 minutes, while the average delay in departure is 2 hours and 5 minutes. The average delay in the arrival of KM Umsini is 3 hours and 8 minutes, and the average delay in departure is 3 hours and 12 minutes. The strategies implemented to improve the factors affecting the punctuality of the vessels' arrival and departure times include the Embarkation/Debarkation Service Process, the Loading/Unloading Process, the Freshwater Bunkering Process, the Fuel Bunkering Process, and the delays in the IT system facilitated by Inapornet in handling Clearance Documents.

This research aims to analyze the workload of TruLaser Trumpf 3030 machine operators at PT. XZY using the Full Time Equivalent (FTE) Method. Data collection was carried out through interviews, direct observation, and lead time measurements in the Preparation Department, especially on the Trumpf TruLaser 3030 Machine. The results of the analysis showed variations in FTE values ​​over 3 days for 1 machine operator for 8 working hours. Although the majority of FTE values ​​are below the overload value, there is one case where the FTE value on September 20 2023 is 0.861, below the required standard. The conclusion shows that there is no problem of work overload for the Trumpf TruLaser 3030 machine operator, however, overtime or overtime is planned by the PPIC/Planner team to achieve production targets. Factors such as machine speed, machine errors, equipment delays, and hampered production processes cause operator idle time. The recommended solution is to maintain and repair machines regularly, plan a more efficient work flow, prepare materials well, improve facilities for material handling, and carefully plan the production process. To overcome idle time, it is recommended to provide additional work such as training for interns or administrative work during shift changes or the next day.            

Real-time data management plays a crucial role in Internet of Things (IoT) applications that require fast and efficient data processing and analysis. This article aims to explore various methods of real- time data management used in the context of IoT. These methods encompass data collection, transmission, storage, and real-time analytics. The primary focus is on enhancing the efficiency of IoT data management and minimizing delays in decision-making based on incoming data. The outcomes of this approach are expected to optimize the performance of IoT applications by providing rapid responsiveness to continuously flowing data. Thus, the article summarizes the objectives, methods, and outcomes of implementing real-time data management for high-performance and optimal responsiveness in IoT applications.

This study aims to determine the effect of Profitability, Solvency, and Audit Tenure on Audit Delay. The purpose of writing scientific articles is to find out the hypothesis of influence between variables, which can be used in future research. This research uses qualitative descriptive methods and library research accessed through Google Scholar, e-books, and other online media. The result of writing this literature review article is: Profitability and Solvency have a positive insignificant effect on Audit Delay, Audit Tenure has a significant effect on Audit Delay.    

This study highlights the important role of inclusive education in supporting children with speech delay, particularly in improving their communication and social interaction skills. Findings show that in New Zealand, a functional approach to inclusive education is supported by teachers' deep understanding and psychologist support. However, public awareness of inclusion in Indonesia is lacking, still a challenge, influencing parents' decisions in enrolling children in inclusive schools. The main recommendations are continuous training for teachers and an extensive public awareness campaign to strengthen inclusive education practices. With these measures, it is expected that inclusive education can significantly improve the support and understanding of children with speech delay in the educational context.

The various building failures show that there are still many construction safety problems that are being ignored so that the Habibie library building construction project in Parepare City cannot be separated from these threats. Implementation of the Occupational Safety and Health Management System (SMK3) needs to be held to this construction project to prevent, reduce, and even strive to eliminate the risk of work accidents (zero accidents). The aim of this research is to analyze the level of success of the SMK3 and factors causing the delay of its implementation. This study using a descriptive method with qualitative approach through distributing questionnaires to 150 respondents which later be analyzed using SPSS program. The research results show that the success rate for implementing occupational safety and health is 74.20% and the most influential inhibiting factors are limited funds and also the lack of knowledge about SMK3 from the company and its employees.

The purpose of writing this article is to determine the effect of audit delay, audit fees, and audit tenure on audit quality. This article was carried out by conducting a literature study from various research that has been carried out. The purpose of writing this article is to build a hypothesis of the influence between variables to be used in further research. The results of this literature review article are: 1) Audit delay has an effect on Audit Quality, 2) Audit Eee has an effect on Audit Quality and 3) Audit Tenure has an effect on Audit Quality.  

Early childhood development is something that will disrupt a child's life, which arises from a mismatch in their development. The research objective of this research is to understand the problems faced by young children, minimize the emergence and impact of these problems, and be able to provide appropriate assistance efforts. Therefore, it is important to know about early childhood development because at this time, children are in a golden age that only comes once and cannot be repeated. As educators and parents, it is mandatory to see children's growth and development from an early age, and what a loss it is for parents who don't care about their children's development. A child's problem is something that is disturbing. Language development disorders are the inability or limitations in using linguistic symbols to communicate verbally or delays in a child's ability to develop speech and language according to their age group, gender, customs and intelligence. Therefore, if speech and language disorders are not treated appropriately, there will be problems with reading ability, verbal ability, behavior, psychosocial adjustment and poor academic ability. Parents/teachers need to understand this problematic behavior because "problem children" are usually seen in the classroom and they even display problematic behavior in all interactions with their environment. Children's lives, which arise due to disharmony in their development.

This research aims to analyze the influence of audit tenure, KAP size, auditor changes, and audit opinion on audit delay. Audit delay is the time span for completing a financial report audit by an independent auditor, which can affect the timeliness of submitting financial reports. Audit tenure, KAP size, change of auditors, and audit opinion are considered as factors that can influence the length of audit delay. This research uses data from audit reports of companies listed on the Indonesia Stock Exchange (BEI) during the 2018-2022 period. Data analysis was carried out using multiple linear regression. The research results show that audit tenure and change of auditors have a positive effect on audit delay, while KAP size and audit opinion have a negative effect. These findings provide implications for regulators and the audit profession to establish appropriate policies regarding audit tenure, changing auditors, and selecting appropriate KAPs to minimize audit delays and increase the timeliness of financial reporting.

Working on a project requires careful planning, so that it can be carried out with optimal time and cost. However, in practice, the implementation of project work usually encounters obstacles that cause schedule delays which result in cost overruns. Therefore, to determine the accuracy of the implementation of a project, routine evaluation and analysis is carried out with the aim of knowing how the progress of a project is progressing. In this research, the Earned Value Analysis method is used to examine trends in schedule variance and cost variance in a period (time) during the project. Based on the calculations and analysis carried out, it can be concluded that there were no delays in the implementation of the Kapal X construction project at X company, the work was carried out according to the predetermined schedule, even faster than the previously planned schedule. Based on the results of the analysis of project completion projections in terms of time, the results for the projected remaining work time (ETS) were 268 days and for the projected total project completion time to completion (EAS) it was 594 days or 306 days faster than the initial plan of 900 days.    

Effective and efficient workshop management is a crucial element in the shipbuilding industry to ensure smooth production processes and quality final results. In an effort to increase efficiency and productivity, this research optimizes workshop management from equipment to monitoring project work on this system. Especially in the HO (Hull Outfitting) system at PT. PAL INDONESIA. The case study method was used to collect data from field observations, interviews with relevant personnel and analysis of documentation related to application implementation. This application facilitates more detailed real-time monitoring of workshop activities, allowing managers to quickly identify and resolve operational problems and take necessary corrective actions. The use of this application also aims to improve equipment and material management with more efficient scheduling and better integration between various departments. Implementing the HO (Hull Outfitting) system in applications also provides additional benefits, such as more integrated and comprehensive project management, better monitoring of the condition of workshop equipment, and reduced risk of errors and delays. With a web-based application, the equipment calibration and maintenance process is more structured, transparent and responsive to changes. These findings underline the importance of information technology in supporting the optimization of workshop management and increasing productivity in the shipbuilding industry.

This article tries to raise the theme of the impact of interest (usury) on the development of sharia banking in Indonesia. In the Islamic view, interest paid by conventional banks is included in usury. The practice of usury isu haram because usury is an act that exceeds the nominal amount of the loan. This action is contrary to the teachings of the Islamic religion, Islamic teachings do not allow making additions in the wrong way which can cause injustice. The research method used is a qualitative method by collecting several materials, legal sources and other comparative research materials. This qualitative method uses a secondary approach. A secondary approach can make it easier to obtain discussions from various references and information from various literature studies. The materials and objects used are journals and books. To strengthen understanding, the author emphasizes looking for various relevant journals and various opinions of figures. The research results show that the practice of bank interest (usury) cannot be avoided in the banking industry as a financial institution and an intermediation medium between surplus units (lenders) and deficit units (borrowers). Riba is additional (ziyadah) without compensation that occurs due to delays in previously agreed payments. There are 2 types of usury which can be grouped into 2, namely debt usury and buying and selling usury. The prohibition of usury has also been regulated in several verses and authentic hadiths where a person is commanded to avoid usury because it will harm oneself and others. Overcoming this requires efforts to avoid losses due to the negative impacts it causes. As a result, it creates various economic impacts felt by society, such as gaps in economic growth.      

In the present day, many have used communication tools to share data as text, video, images, or sound and the like. There is a speed of data transmission depending on the delivery method, if there is a system error then the data is likely not to be sent, therefore there are various types of data managers so that there are no obstacles or errors during the data transmission process. The star topology was chosen for its advantages in network management, trouble shooting and providing reliable and easy-to-organize connectivity. The main focus is to evaluate the efficacy and effeciency of the star topology in handling different amounts of data traffic using performance characteristics including packet loss, jitter, delay, and throughput. And the use of switching in the star topology can provide optimal and stable performance under high traffic load can provide reliability and efficiency in data traffic management.

This research aims to investigate the factors that influence companies in carrying out audit switching or changing auditors. Specifically, this research analyzes the influence of audit opinion, size of the Public Accounting Firm (KAP), and audit delay on a company's decision to change auditors. The issue of audit switching is important considering the existence of regulations that require regular rotation of auditors to maintain audit independence. Using a sample of companies listed on the Indonesia Stock Exchange, this research applies a logistic regression model to test the influence of independent variables (audit opinion, KAP size, and audit delay) on the dependent variable, namely audit switching. The data used comes from financial reports and company audit reports.

Production problems are a very important problem for business actors because they can affect the profits they earn. The smoothness of production itself is influenced by whether or not the raw materials will be used. In this case, raw material inventory management can help reduce possible risks. Raw material inventory management is the most active element in company operations which is continuously obtained. In this case, researchers use the Safety Stock, Economiq Order Quantity (EOQ) and Reorder point inventory management methods to optimize the purchase of raw material inventory so that it becomes optimal and efficient. In this research, problems were found at the Tofu Factory regarding raw material supplies. In this case, the Tofu Factory always experiences a shortage of raw material stock and experiences waste in the costs incurred. This resulted in the Tofu Factory experiencing delays in deliveries to consumers. The results of the analysis show the use of raw material inventory management methods applied at the Jagabaya tofu factory, namely SafetyStock, Economic Order Quantity (EOQ) and Reorder Point. The implementation of this method is not optimal so this method does not work as it should because of several inhibiting factors. The management of raw material supplies at the Jagabaya tofu factory still does not use a structured method, so that in the production process stock runs out often occur. Therefore, raw material inventory management at tofu factories is only based on estimated sales numbers without clear calculations.

Audit delay is the length of time for completing an audit carried out by an auditor, which is measured by the time difference between the date of the financial report and the date of the audit opinion in the financial report, and is one of the ratios to measure the company's ability to pay all obligations. This article reviews the factors that influence audit delay, namely solvency, auditor turnover and auditor opinion, a study of tax accounting literature. The purpose of writing this article is to build a hypothesis of the influence between variables to be used in further research. The results of this literature review article are: 1) solvency influences audit delay; 2) changing auditors affects audit delay; and 3) audit opinion has an effect on audit delay. .

The main problem in this thesis is that in the last few months JNT Express Palembang branch has often experienced a decline in sales and also complaints from customers about the many problems that occur in the service felt by consumers such as problems with late delivery of goods, shipments that cannot be tracked, damage to goods to loss of delivery packages. These complaints were obtained from the Internet Media. The purpose of this discussion is to find out the Implementation of Risk Management in the Delivery of Goods at JNT Express Palembang Branch Services and Islamic Economic Review on Risk Management in the Delivery of JNT Express Palembang Branch Services. This research is a field research. By using qualitative methods. This research uses informants consisting of 6 people, namely 1 Leader, 1 Admin, 1 Courier and 3 JNT Palembang Branch Consumers. This research was conducted at JNT Ekpress, Jl. Sultan M. Mansyur, Bukit Lama, Kec. Ilir Barat I. Palembang City. While the data collection method in this study is in the form of observation, interviews, documentation. Based on the results of the study. Risks in shipping JNT goods are Social, Physical, Customer and Competition factors. The obstacles are delays, wrong addresses, damage and loss of goods. To prevent or minimize the occurrence of risks, JNT issues Standard Delivery Terms (SSP). Review of Islamic Economics on Risk Management in the Delivery of Goods Services JNT Express Palembang Branch is not contrary to Islam.