Publication Search

PT KHI is a company operating in the food and beverage industry in Indonesia. In production activities there are many factors that can hinder performance productivity. Worker productivity is a value that cannot be seen directly except through a calculation process, so the worker productivity value is calculated from the company PT KHI. This research was carried out in the Production department using the Time and Motion Study method with a Lean Manufacturing approach, namely waste or extravagance to increase labor productivity in the Production department area. This time it was carried out directly by means of field observation. So that primary data is obtained. The results were obtained in the form of recommendations for improvement, namely: adjusting the total headcount in the line F area from previously 7 headcounts to 6 headcounts and moving several tasks from the carton sealer operator to each operator in the packing area of ​​line F, then classifying them into 3 headcounts for the packing section and 3 headcounts for the packing section. . It can be concluded from the results of this research that one type of waste is eliminated, namely adjusting the number of operators in the packing line F area so that before the improvements, labor productivity is 71.71% on line F and after labor productivity is 83.63%. By making improvements, cost savings of IDR 4,515,133 were obtained for 26 working days.  

PT DIFA KREASI is a service company in the printing sector. Established in 1972 on the basis of an effort that started from National Publishers, who have been active since the beginning of independence, to have a modern offset industry. As the basis for the overall activities of PT DIFA KREASI and the commitment of all existing personnel to make PT DIFA KREASI an international standard business actor, it is very necessary to implement a Quality Management System. The aim of the research is to measure the quality of paperback type products using statistical process control methods. The research method used is a combination method of direct observation and interviews. The research results show that the statistical process control method is appropriate to use for measuring the quality of paperback type products. Based on the results of product quality measurements using control charts in the perfect bending process, it is controlled (uniform), while measurements in the printing process produce uncontrolled (non-uniform) data. Meanwhile, the biggest causes of defects in the printing and perfect bending processes are respectively dirty and melted glue.

This research was conducted to determine and explain the influence of advertising, brand image and price on interest in purchasing Le Minerale products. The research was carried out by distributing questionnaires online using Google Form. This research uses quantitative methods, the population in this research is consumers who use Le Minerale products in the Greater Solo area with a sample size of 105 respondents. The research was carried out with the help of the SPSS 27.0 application as a tool for calculating data obtained using 4 variables, the independent variable is advertising, brand image and price, while the dependent variable is purchase interest. The analysis used in this research is the classical assumption test, multiple linear regression and hypothesis testing. The results of the F Test research obtained a calculated F value of 13.139 > 2.460 with a significance value of 0.000 < 0.05 so it can be concluded that advertising, brand image and price simultaneously influence purchasing interest.

Diabetes Mellitus is a group of metabolic diseases characterized by hyperglycemia due to impaired insulin production, insulin action. Management of the 4 pillars of diabetes mellitus includes education on eating arrangements. The purpose of this study was to determine the effect of booklet media education on dietary compliance in patients with type 2 diabetes mellitus in the ranomuut health center work area.The research design used is a pre-experiment with a one group pre and posttest design approach. The sample in this study were 23 respondents using purposive sampling technique. the research instrument used was a questionnaire sheet. Then the data that has been collected is processed using the SPSS 16.0 program to be analyzed using the Mc.Nemar statistical test with a level of meaningfulness (α) = 0.05. Based on the results of the study when given education for the pre-test, the highest percentage was non-compliant 21 respondents (91.3%) and the post-test the highest percentage was compliant 22 respondents (95.7%). From the results of the Mc.Nemar statistical test, the P value = 0.000 with a significance of <0.05, which means Ha is accepted and Ho is rejected. The conclusion of this study is that there is an effect of booklet media education on dietary compliance in patients with type 2 diabetes mellitus in the ranomuut health center work area. This study is expected to increase knowledge in implementing dietary compliance so that it can control the problem of diabetes mellitus.

The author conducted this research to answer and understand the work stres experienced by employees of the social rehabilitation office at the Surakarta social service. This type of research uses qualitative. The sample studied was 4 employees. The data collection mothod uses interviews to reveal the work stres that is being experienced. Work stres is a very important occupational health problem, which can cause physical illness to the point of death, and can affect work well-being and productivity.

This study aims to obtain data and information about developments and marketing strategies for happy firewood shrimp crackers in Mendahara Ilir Village, Mendahara District, Tanjung Jabung Timur Regency, supporting factors and marketing inhibiting factors, and marketing strategies for happy firewood shrimp crackers in Mendahara Ilir Village, Mendahara District. East Tanjung Jabung Regency in terms of shari'ah marketing. This research uses a kulitative research method. Data collection techniques through observation, interviews, and documentation. The data analysis technique uses qualitative data analysis based on marketing mix theory. The results of the study show that: (1) The sales of happy firewood shrimp crackers obtained in the last 5 years tend to decrease, namely from 2018 to 2022; (2) The strategy used by the seller to market the happy firewood prawn crackers by marketing them to stalls, opening stalls, and through direct marketing or promoting directly to neighbors; (3) The supporting factors in the strategy in marketing the happy firewood shrimp crackers in Mendahara Ilir Village, Mendahara District, East Tanjung Jabung Regency lie in the distinctive and tasty taste made from shrimp, the happy firewood shrimp crackers are durable, the raw materials are easily accessible and does not use hazardous materials in the production process and has received halal certification from the Indonesian Ulema Council, while the inhibiting factor for the happy firewood shrimp cracker marketing strategy lies in the packaging which still uses clear plastic and has not yet obtained a permit from the Food and Drug Supervisory Agency (BPOM). BPOM); (4) The marketing carried out by the seller of firewood prawn crackers is in accordance with the trade concept used by Rasulullah SAW, namely honesty, sincerity, hospitality, and advice. In addition, the marketing of happy firewood shrimp crackers is also in accordance with the characteristics of sharia marketing, namely theistic, ethical, realistic, and humanistic.

This study conducts a thorough examination of the factors influencing consumer purchasing interest in the snack market, utilizing Mr. Fathoni Jr's Gajahan Leker as a case study. The research focuses on the analysis of the impact of price, flavor choices, and location on consumer purchasing preferences within the context of Leker products.By gathering data through surveys conducted using questionnaires and statistical analysis, the research discovers that the price of Mr. Fathoni Jr's Gajahan Leker plays a significant role in shaping consumer purchasing interest. Additionally, the various flavor choices offered by this brand also have a positive impact on purchasing preferences.The strategic placement and good accessibility of locations are proven to be key factors in attracting consumer purchasing interest. The success of Mr. Fathoni Jr's Gajahan Leker in leveraging strategically located sites to reach their target market contributes significantly to consumer purchasing interest.This study provides profound insights for business owners, marketers, and strategic decision-makers in the snack industry. By understanding the complex interactions between price, flavor choices, and location, Mr. Fathoni Jr can devise more effective strategies to enhance consumer purchasing interest, strengthen their brand, and support long-term business growth.

Damar Kurung is a typical Gresik city art product and has considerable market and export potential. With the Export School Independent Study program "Be a Digital Exporter", it is expected to be able to introduce Damar Kurung products to local and international markets. Efforts need to be made to be able to utilize the potential that exists in regional MSME products, one of which is the Independent Study of the Export School "Be a Digital Exporter" held by Merdeka Campus. The research method used a qualitative approach with a descriptive method. Data collection is carried out using observation and documentation techniques from the results of observations that can be concluded. The results of this study are Through the Sang Damar company created in groups in the Independent Study program of the Export School, we introduce and try to market Damar Kurung products. It is hoped that in this way it can boost the development of regional MSMEs in Indonesia, especially in Damar Kurung products typical of the city of Gresik.

Oxytcin massage is a massage that can stimulate the process of breast milk production, providing a sense of comfort, relaxation and calm to help breast milk production. Childbearing family is a family that awaits birth starting from pregnancy until the birth of an early child and continues until 30 months old. The purpose of this study was to determine the effect iveness of oxytocin massage on breast milk production in childbearing families in the Melati Room of at second grade Robert Wolter Mongosidi Hospital. This research uses the Quasi Experiment method with a one group pre-test -post test design. The sample of this study amounted 17 subject using Purposive Sampling. Data collection was taken by observation sheets. Furthermore, the data that collected is analyzed using Wilcoxon's statistical test with a significant level (α) of 0.001. The results of this study showed before and after oxytocin massage most mothers experienced an increase in breast milk production. The results of the analysis tested using the Wilcoxon test obtained a value of P = 0.001 (<0.05), meaning there is an effect of oxytocin massage on breast milk production in childbearing families. The conclusion in this study the effected oxytocin massage on breast milk production in the childbearing family in the Melati Room of at second grade Robert Wolter Mongosidi Hospital.

Productivity is an indicator of a company's performance. In 2021 to 2023, a precast concrete construction and manufacturing company had difficulty achieving its spun pile production target of 3,480 tons/month. This condition causes the company's productivity to fluctuate and tend to decrease overall. This study aims to evaluate the decline in productivity by measuring the value of productivity based on 3 criteria, namely material, labor and machine criteria. The method used is Objective Matrix (OMAX). The productivity value in the production years 2021 to 2023 fluctuates with a downward average value. The highest productivity value in the 2021 production year occurred in period 8 with a value of 748 while the lowest productivity value occurred in period 6 with a value of 170. The highest productivity value in the 2022 production year occurred in period 21 with a value of 638 while the lowest productivity value occurred in period 14 with a value of 166. The highest productivity value in production year 2023 occurs in period 26 with a value of 966 while the lowest productivity value occurs in period 27 with a value of 0. Criteria that contribute less to productivity and need to be improved are labor criteria that show values below the average. While the material and machinery criteria show values that tend to be below average. While the material and machine criteria show values that tend to be good, with the application of OMAX, PT XYZ can improve partial productivity and total productivity in the future and identify factors that cause a decrease in productivity.

Warehouse is an important part of a company. Warehousing activities must have a good storage system to support the smooth production process and warehousing activities. PT. XYZ is a manufacturing company in the field of paper production that uses 100% recycled paper as its raw material. PT. XYZ has many warehouses needed for production. Stock taking is an activity of physically counting the inventory of goods in the warehouse or production to determine the real or actual quantity owned by the company. Stock taking is important to carry out control, so that the company can monitor and know the assets it owns. By carrying out comprehensive stock taking activities, real stock reports will be obtained which will be used as material for consideration for further development. One of the problems that often occurs in spare part warehouses is a mismatch in the final balance of spare part components between the stock card and the inventory system which occurs continuously. This problem can cause errors in stock taking reports which can result in losses for the company. This research uses the fishbone diagram method. This diagram is often called a cause and effect diagram. This fishbone diagram is used to analyze and look for factors causing problems that have a significant impact on differences in inventory. Human, environmental, material and method factors are factors that cause differences in existing inventory. Human factors such as drowsiness and lack of concentration can also be caused by environmental factors such as lack of air circulation, causing the temperature in the spare parts warehouse to increase. The lack of discipline of spare parts warehouse officers also greatly influences the results of stock taking activities carried out

This study aims to determine the number of rejected products (products that do not meet consumer and company standards) for 220 mL cup products using the six sigma method with 5 stages (define, measure, analyze, improve, and control) which will then be given improvement recommendations using failure mode effect analyze (FMEA). After going through the calculation process, it is known that the company's Deffect Per Million Opportunity (DPMO) value is 3.67 which indicates that the percentage of production without deffects is 96.32%. There are four critical to process (CTQ) in the 220 mL cup defect and the largest is the skewed seal with a percentage of 70%. The results of calculations using risk priority number (RPN) found recommendations in the form of corrective actions in 80% of the group of causes of oblique seal deffects so that it is hoped that the company will review and make improvements to the proposal so as to reduce deffects per million opportunity (DPMO) in the 220 mL cup production unit.                                                                                                      

Quality is an important factor in production, so companies must maintain the quality of their products in order to be able to compete in the market. One of them is PT. Swadaya Graha operates in the construction and fabrication services sector, working on several projects, one of which is pipe support. In pipe support fabrication there are problems during the production process. This problem is the presence of "scratch" defects on the surface of the material. The aim of the observations carried out is to minimize the occurrence of production process defects in pipe support fabrication. From the results of the analysis using a cause-and-effect diagram, there are 3 factors that cause defects. And improvement efforts to minimize defects using the 5W + 1H method.   Keywords: Cause-Effect Diagram, Defects, Scratch, 5W + 1H Method.

With the rapid development of information technology, Tiktokshop has become an increasingly popular e-commerce platform in Indonesia. However, selling on Tiktokshop does not always guarantee success, especially for small and medium enterprises (MSMEs) that focus on selling special products such as CustomKids. This research aims to determine the impact of Tiktokshop's inactivity on sales of MSMEs, especially the custom children's industry in Indonesia. This research analyzes various factors that might influence Tiktokshop's inactivity, such as lack of presence, lack of user interaction and algorithm changes. We also assessed the direct impact of the suspension on sales of CustomKids products, taking into account variables such as decreased sales, decreased market share, and the psychological impact on MSME owners. The results of this research will provide insight to MSME owners, the government and stakeholders to help them develop strategies to advance Tiktokshop activities and increase the competitiveness of MSMEs, with a special focus on CustomKids products. It is hoped that the implications of this research finding will help in decision making to improve the performance of MSMEs in the digital era.

This observation was made to determine the influence of product quality on the purchase decision of Iphone products among Surakarta residents. This observation used quantitative methods using manual data obtained by distributing documents or questionnaires and collecting responses from a sample of 59 participants. This observation uses Intelligent Partial Least Squares (PLS) analysis to evaluate the hypothesis, as well as using a quantitative approach. Based on the results of the Smart PLS analysis test conducted, it shows that product quality has a positive or significant effect on purchasing decisions.

The aim of this research is to evaluate the influence of brand image, product quality and price on purchasing decisions for Indomie instant noodle products. The research method used is quantitative and uses a population of all Indomie instant noodle consumers. A total of 102 respondents from the city of Surakarta were selected as samples using a non-probability method with purposive sampling technique. Data collection was carried out using Google Forms by distributing questionnaires personally. Data analysis uses classical hypothesis testing, multiple linear regression, and hypothesis testing. The results of the F test obtained a calculated F value of 95.866, exceeding the critical value of 2.460, and a significance level of 0.000 < 0.05. It can be concluded that brand image, product quality and price have a significant influence on purchasing decisions for Indomie instant noodles.

Quality control in the garment industry plays an important role to ensure that the products produced meet high quality standards and satisfy consumers. The Acceptable Quality Level method is a promising approach for optimizing garment product control. This research focuses on the application of the Acceptable Quality Level method in managing garment quality at PT XYZ. The aim is to explore the extent to which this method can be applied efficiently in garment production by considering the existing challenges and opportunities. This study uses the "L Tunic Crinckle" tunic sample from PT XYZ as the research object. Data collection involves primary data from direct interactions and observations, as well as secondary data from related literature and journals. Raw material sampling methods are based on product defects, focusing on attribute data to assess non-compliance with specifications. With an AQL value of 2.5% and general supervision level II, this study took a sample of 125 tunics for inspection. Even though several minor and major defects were found, the total rejects did not exceed acceptance standards, so the tunic product lot could be accepted without re-inspection

Industry is an economic activity that processes raw materials, raw materials, semi-finished goods, and/or finished goods into goods with higher value. Industrial revolution 4.0 is often also called the cyber physical system. PT XY to run its business has a system, namely Management System (MS). MS cannot be separated from information technology to support KPI achievement. One of the information technologies that needs to be applied to the production department is OEE Downtime Details as a Realtime production report. currently has a system that is not yet effective in OEE KPIs, especially in Downtime Details. The method that can be used to complete analysis related to this problem is the Pureshare Method which displays quantitative data to provide motivation and suitability for business and technology goals. The results obtained from this research are that creating a dashboard can increase the effectiveness of data input and the data can be standardized so that the data is more valid. Suggestions for further research require evaluation regarding the development of information that will be presented on the dashboard.

Wardah has built a reputation for itself as a manufacturer of premium, halal cosmetics in an effort to attract a wider audience and increase sales. Finding out how BPOM and Halal labels affect product quality and customer happiness among Wardah cosmetics customers is one goal of this study; another is to determine whether factors related to price influence the buying decision of those who purchase Wardah cosmetics. As part of the research, 105 people who regularly use Wardah cosmetics were asked to fill out a survey. Consumer satisfaction with Wardah cosmetics was shown to have a favorable and statistically significant effect on overall satisfaction. Furthermore, customer satisfaction with Wardah cosmetics was positively and significantly affected by the brand image variable. A similar favorable and statistically significant relationship existed between service quality and customer happiness with Wardah cosmetics. In addition, customer satisfaction with Wardah cosmetics was positively and significantly impacted by the following factors: product quality, brand image, and service quality.

Developing corn production is one aspect of agricultural development. This research for a Geographic Information System-based website was created with the aim of finding out data on corn production which fluctuated in 2017-2019 in Central Java Province. The data obtained was collected from related agencies such as BPS Central Java Province and the Ministry of Agriculture.