Publication Search

Less rigid, easy to rust trapezoidal wave galvalum roof as a problem encountered in industrial buildings, warehouses, commercial facilities, and residential homes. The purpose of making a trapezoidal wave galvalum roof with dimensions of 600x102 cm, height 3 cm, thickness 0.30 mm. The manufacturing method includes: design of a trapezoidal wave galvalum roof with dimensions of 600x102 cm, height 3 cm, thickness 0.30 mm; selection including purchase of Aluminum Zinc coated steel (BJLAS) materials; design and manufacture of roll-forming; formation of a trapezoidal wave profile with dimensions of 600x102 cm, height 3 cm; cutting the trapezoidal wave galvalum roof every 6 m; and inspection of quality-dimensions-standards. The result of the manufacture is a trapezoidal wave galvalum roof with dimensions of 600x102 cm, 3 cm high, 0.30 mm thick with a total manufacturing cost of Rp. 328,000/sheet, and a manufacturing duration of 1.2 minutes/sheet, which means that the trapezoidal wave galvalum roof meets the dimensional specifications of SNI BJLAS G550-SNI 4096:2007 and is suitable for application as a roof covering system on medium-span buildings.

Problems that often occur in brooch pins are bent wire or detached from the hook, also the possibility of the brooch coming off the pin when worn as a problem encountered. The purpose of fabrication is to obtain a 60 mm long brooch pin, 0.5 mm diameter, AISI 1045 material. Fabrication methods include: brooch pin design; selection of AISI 1045 material for 0.5 mm diameter wire and for 0.3 mm plate; cutting wire 94 mm long and sharpening one end; cutting the brooch pin end hook plate; forming the wire into a circle with a 4 mm hole for one winding; cutting a 0.3 mm thick plate in the shape according to the design; forming a pointed end hook with a punch and die; pressing the base of the wire to one side of the shape plate; electroplating with Chromium solution material; ordering and installing the customer's taste brooch; unification between the brooch and the pin stem; and quality-dimensional inspection. The fabrication results are in the form of a 60 mm long brooch pin, 0.5 mm diameter, AISI 1045 material coated with Chromium with a total cost of IDR 290,-/piece and a production duration of 90 seconds/piece which means that the brooch pin can be used for various desired accessories.

Various viruses due to unhygienic surfaces of eating and drinking utensils, especially those that are frequently used and repeated, if they do not meet health standards have the potential to cause disease in subsequent users as a problem faced. The purpose of fabrication is to obtain eating and drinking utensils (talam-ompreng) measuring 400x300x0.4 mm made of SS304 which are hygienic, practical, heat resistant, not easily broken, not easily worn, easy to wash and easy to carry. The fabrication method includes: design of a 40 cm long, 30 cm wide eating tray, 7 serial basins (rice container 12 x 12 cm 2 basins, side dish container 8 x 8 cm 3 basins, vegetable container 6 x 6 cm 1 basin, fruit container 6 x 6 cm 1 basin) with a depth of 30 mm, a thickness of 0.4 mm; selection of SS304 plates; design of pressing molds; checking the thickness of SS304 plates; cutting material 55 x 45 cm; pressing until flat (not bulging or thinning/torn); bending the edges around; finishing cleaning metal thorns; stamping according to order; and quality inspection of the ompreng tray according to nutritional standards. The fabrication results in a 40 cm long, 30 cm wide, 0.4 mm thick tray made of SS304 material with a total production cost of IDR 75,000/unit, and a process duration of 2 minutes/unit which implies that the eating and drinking utensils can be used repeatedly after being washed clean from viruses.

The opening of the wrench opening for M14 bolts is broken in use as a problem encountered in field activities. The manufacturing objective is to obtain an M14 mm wrench-ring wrench from forged steel measuring 200x6.5 mm. The manufacturing method includes: wrench design on one end and ring wrench design on the other end for bolt size M14 mm, cutting sufficient volume of steel material after forging according to the design, wrench forging on one end and ring wrench forging on the other end for bolt size M14, Chromium plating; finishing of wrench gap and hexagon for ring wrench with a distance of 22 mm, and quality-dimension-standard inspection. TThe manufacturing results are in the form of a paired wrench with an M14 mm ring wrench made of forged steel coated with chromium measuring 200x6.5 mm with a total production cost of IDR 30,000/unit, and a process duration of 3 minutes/unit which has the impact that the paired wrench with a ring wrench for M14 mm bolts measuring 200x6.5 mm can be used for M14 bolts in general with an opening width of 22 mm for both ends as a wrench or ring wrench.

The frequent breakage of saw blades and the use of blades that are not suitable for beginner saw operators present a significant problem in metal sawing activities. This study aims to produce a double-sided sharp steel saw blade with dimensions of 310×30×0.8 mm. The production process consists of several stages, namely designing the double-sided sharp saw blade, cutting high-carbon steel material to size, drilling 4 mm diameter holes at both ends with a 310 mm distance between holes, forming sharp edges on both sides of the blade, hardening only the two cutting edges, followed by labeling, packaging, and quality and dimensional standard inspection. The production output is a double-sided sharp steel saw blade measuring 310×30×0.8 mm made from medium carbon steel. The manufacturing cost is Rp. 3,500 per unit with a processing time of 3 minutes per unit. These results indicate that the saw blade can be mounted on a general saw handle and has improved resistance to breakage, making it more suitable for beginner users whose sawing motion is not consistently aligned on a single flat plane.

Indonesia is an archipelagic country that has a diversity of ethnic groups as well as a rich heritage of arts and culture. One form of art found is weaving with clove flower motifs. The purpose of this study is “The Application of Clove Flower Motif Weaving Technique on Ready to Wear.” The main material used is shoelaces, as a weaving material that is easy to shape and unique. The method applied is Research and Development (R&D), which includes: identifying potential and problems, data collection through literature study, observation, documentation, product design, design validation, to the process of making and evaluating the final product. The results of the study show that the clove flower motif weaving technique can be well applied to ready to wear, especially on the vest and pants parts, producing a modern fashion. Applying this technique requires high precision, especially in the process of arranging the weaving pattern and integrating it with the main material. This study is expected to serve as a reference in developing innovative designs. The conclusion of this research is that the weaving technique gives a unique and aesthetic impression on ready to wear. The suggestion for making woven products applied to ready to wear is that during the process of ironing glue on the weave, the heat should not be too high because the shoelace material is easily burned, and the ends of the weave should be burned to prevent fraying.

This research is motivated by the importance of implementing Standard Operating Procedures (SOP) in speed boat maintenance activities as a supporting facility for ship agency operations at PT. Sinar Pasific. The high intensity of speed boat usage makes the fleet vulnerable to damage if maintenance is not carried out regularly and according to procedures. Based on initial observations, inconsistencies in maintenance implementation, incomplete documentation, and damage to the engine, electrical systems, and hull were still found, which can disrupt company operations. This study aims to determine the implementation of SOPs, the obstacles encountered, and the efforts made to optimize speed boat maintenance at PT. Sinar Pasific. This research was conducted at PT. Sinar Pasific during the author’s Onboard Practical Training (PRADA) from August 2024 to July 2025. The research method used is a descriptive qualitative method. The data sources were obtained through direct field observation, semi-structured interviews with personnel involved in speed boat operations, and documentation studies related to fleet maintenance activities. The results show that the implementation of Standard Operating Procedures (SOP) in speed boat maintenance at PT. Sinar Pasific has been carried out but has not yet run optimally. This is indicated by inconsistent maintenance schedules, lack of supervision, and incomplete maintenance documentation. In addition, several problems were still found, such as damage to the engine, electrical systems, and speed boat hulls, which can hinder company operations. To overcome these obstacles, the company has made efforts by improving discipline in SOP implementation, conducting regular supervision and evaluation, improving maintenance documentation, and increasing technicians’ understanding of the importance of preventive maintenance so that speed boat conditions are maintained and operational activities run smoothly.

The rapid population growth in urban areas has caused various complex problems, such as congestion, air pollution, and the high use of private vehicles, so that it becomes a challenge in realizing sustainable cities and settlements. Public transportation is present as one of the solutions in overcoming these problems because it can increase community mobility and reduce negative impacts on the environment. This study aims to analyze the implementation of Mass Rapid Transit (MRT), Light Rail Transit (LRT), TransJakarta, and Electric Rail Trains (KRL) in supporting the achievement of SDGs 11 Sustainable Cities and Settlements. This study uses a descriptive qualitative method with a literature study approach. The results show that the MRT and KRL contribute to efforts to reduce carbon emissions and congestion, TransJakarta excels in the aspect of cost affordability while the LRT plays a role in improving urban connectivity efficiently. Thus, public transportation palas an important role in realizing sustainable cities and settlements with the integration between modes of public transportation which is the main factor in supporting the achievement of SDGs 11 optimally.

This study aims to implement the Cooperative Integrated Reading and Composition (CIRC) learning model to improve collaboration skills and learning outcomes among phase E students in class X-3 at SMA Katolik 2 Kabanjahe in Catholic Religious Education. This research employed Classroom Action Research conducted in two cycles, consisting of planning, implementation, observation, and reflection stages. Data were collected through observation sheets, learning outcome tests, and documentation, then analyzed using descriptive qualitative analysis supported by process and learning achievement indicators. The findings showed that the implementation of the CIRC learning model improved across learning stages, including orientation from 87% to 95%, organization from 90% to 97%, concept introduction from 87% to 92%, publication from 93% to 98%, and reflection and reinforcement from 87% to 98%. Students’ collaboration skills also increased in each indicator, namely working productively from 75% to 88%, actively participating in problem solving from 82% to 88%, maintaining a balance between listening and speaking from 76% to 86%, appreciating group members’ contributions from 73% to 87%, and demonstrating responsibility as group members from 77% to 93%. Learning outcomes also improved, as shown by the increase in the proficient category from 27% to 77%, while the basic and developing categories decreased to 0% in cycle II. These results indicate that CIRC effectively enhances students’ active participation, collaboration, responsibility, and learning achievement. Therefore, CIRC is recommended as an alternative collaborative learning model for Catholic Religious Education, particularly in strengthening cooperative interaction and meaningful understanding of religious learning materials in classroom practice.

Stroke is a neurological disorder caused by impaired blood flow to the brain, resulting in brain tissue damage and various functional impairments. One of the common problems experienced by stroke patients is sleep disturbance, which may be influenced by neurological deficits, limited physical mobility, pain, and post-stroke anxiety. Persistent sleep disturbances can delay the recovery process and reduce patients’ quality of life. The long-term use of sleeping medications may lead to adverse effects; therefore, safe and easily applicable complementary therapies are needed. This study aimed to determine the effectiveness of peppermint oil aromatherapy in improving sleep quality among stroke patients in the working area of Barebbo Community Health Center, Bone Regency. The method used was the implementation of complementary therapy through the administration of peppermint oil aromatherapy to stroke patients experiencing sleep disturbances. Sleep quality was assessed using the Pittsburgh Sleep Quality Index (PSQI) before and after the intervention. The assessment results showed that before the intervention, patients experienced poor sleep quality, characterized by difficulty initiating sleep, frequent nighttime awakenings, insufficient sleep duration, and daytime fatigue. After receiving peppermint oil aromatherapy, patients demonstrated increased comfort, reduced anxiety, improved ability to initiate sleep, and better overall sleep quality compared to their condition before the intervention. Therefore, peppermint oil aromatherapy was found to be effective in improving sleep quality among stroke patients and can be used as a complementary non-pharmacological intervention in nursing care.

Background: Pargarutan Julu Village, East Angkola District, South Tapanuli does not yet have a waste disposal site (TPS), causing residents to habitually dump waste into rivers and burn it around residential areas. In addition, the lack of knowledge about natural disaster mitigation is a problem that needs to be addressed urgently. Objective: This community service activity aims to increase public knowledge and awareness through education on waste management (sorting organic and inorganic waste, impacts of river pollution, and the 3R principle: Reduce, Reuse, Recycle) and natural disaster preparedness (floods and fires). Methods: The activity was conducted outdoors in the village at night using lecture, PowerPoint presentation, and interactive discussion methods, involving 35 participants consisting of children and village residents of Pargarutan Julu. Results: The activity showed high enthusiasm from participants, with many questions raised during the interactive discussion sessions. There was an increase in community understanding of the importance of waste sorting, the dangers of dumping waste into rivers, the application of the 3R principle, and steps for preparedness against flood and fire disasters. Conclusion: The participatory outdoor educational approach effectively improved knowledge and awareness of Pargarutan Julu Village residents regarding proper waste management and natural disaster preparedness, and encouraged sustainable behavioral change in the community.

This community service program (PkM) aims to enhance the digital literacy of teachers and students at Pondok Pesantren Al-Wathoniyah Pusat Putri Klender, East Jakarta, particularly in verifying digital news and content amid pervasive disinformation. Key problems identified include low digital verification competency among senior teachers, limited use of fact-checking tools, and the absence of systematic information management mechanisms within the pesantren. The activity was held on June 10, 2026, employing a blended learning approach combining interactive lectures, hands-on training, and continuous mentoring. Training modules covered: (1) digital literacy for teachers, (2) mitigation of religious information distortion, (3) critical media literacy, (4) videography skills, and (5) content marketing grounded in Islamic values. Thirty teachers and senior students participated. Key outputs include enhanced digital literacy competencies among participants, the Smart Teacher Guidelines module, a donated photography studio equipment set, and national media coverage (JPNN.com). Evaluation results demonstrate significant improvement in participants' understanding of digital information verification, positive content production capability, and motivation to use technology responsibly. This program contributes to SDGs No. 4 (Quality Education), SDGs No. 9 (Innovation), SDGs No. 10 (Reduced Inequalities), and SDGs No. 17 (Partnerships), as well as supporting IKU 3, IKU 5, and IKU 6 of Universitas Negeri Jakarta.

Background:Flooding is one of the most common environmental problems in residential areas and is closely related to poor community awareness of waste management. Improper waste disposal can clog drainage systems, increase the risk of flooding, and lead to various environmental health problems. Objective: This community service activity aimed to improve community knowledge and awareness regarding waste management and environmental health as an effort to prevent flooding in Panompuan Jae Village. Methods: The activity was conducted on May 22, 2026, at the Panompuan Jae Village Prayer House involving 15 women from a local religious study group. The educational methods included lectures, discussions, and interactive question-and-answer sessions. The materials covered waste classification, household waste management, environmental health, and the relationship between environmental cleanliness and flooding. Results: The activity improved participants’ understanding of proper waste management. Participants were able to distinguish between organic and inorganic waste and understood appropriate waste handling practices. They actively participated in the discussion and showed an initial commitment to disposing of waste properly and maintaining environmental cleanliness. Conclusion: The community education program successfully improved public knowledge and awareness regarding waste management and environmental health, supporting flood prevention efforts in Panompuan Jae Village.

The regulation of the 14-day time limit for investigating regional head election crimes, as stipulated in Article 146 of Law Number 10 of 2016 concerning the election of governors, regents, and mayors, was established to accelerate law enforcement, ensure legal certainty, and maintain the relevance of election crime resolution within the strict and sequential stages of elections. However, in practice, this provision often creates legal problems when investigations must be terminated due to the expiration of the time limit, even though strong indications of election crimes exist. This situation raises a legal issue because law enforcement, although procedurally compliant, does not fully achieve substantive justice and legal utility, particularly in maintaining public trust, legal order, and democratic integrity. This study aims to analyze the theoretical basis of the 14-day investigation limit and examine the application of justice and legal utility principles in terminating election crime investigations due to time expiration. The research uses a normative legal method with statutory, conceptual, and analytical approaches. The findings indicate that the 14-day limit is grounded in the principle of lex specialis, legal certainty, speedy trial principles, electoral justice theory, and the effectiveness of integrated law enforcement. This limitation is intended to prevent prolonged legal processes, protect the legal status of reported parties, ensure smooth election stages, and maintain regional democratic stability.

Background: Stunting remains one of the public health problems that requires early prevention through health education and growth monitoring in children under five years old. Lack of parental knowledge regarding balanced nutrition, child feeding practices, hygiene, and routine physical examination can increase the risk of growth disorders in toddlers. Purpose: Physical examination in toddlers is important to identify early signs of growth and developmental problems, including body weight, height or length, nutritional status, and general physical condition. Method: This community service activity was conducted face-to-face using health education, discussion, and direct physical examination methods. The stages of activity included preparation, delivery of educational materials about stunting, physical examination of toddlers, recording the results, and providing simple counseling to parents. Results: The activity showed that mothers were enthusiastic in participating in counseling and toddler physical examination. Before the education was given, several mothers still had limited understanding about the causes, impacts, and prevention of stunting. After the activity, mothers began to understand the importance of balanced nutrition, routine weighing, height measurement, immunization, hygiene, and regular visits to posyandu or health facilities. Conclusion: Education about stunting and physical examination of toddlers can increase parental awareness regarding early prevention of growth disorders. This activity is useful in encouraging families to monitor toddler growth regularly and implement healthy childcare practices.

Analyzing the freshwater needs on Landing Platform Dock (LPD) type ships in the Amphibious Unit of Koarmada II, with a focus on the implementation of the Reverse Osmosis (RO) system to supply freshwater at sea. The problem faced is the limited supply of freshwater on ships operating far from external freshwater sources. This study uses a qualitative approach with interviews, observations, and documentation as data collection methods. The results of the study indicate that the RO system can improve the efficiency of freshwater supply, although technical challenges such as maintenance and crew training still need to be addressed. Optimal implementation of the RO system can support the logistical independence of the ship during long-term operations in remote waters. This study is expected to serve as a reference for the development of freshwater supply systems on Indonesian warships.

This study aimed to examine the association between physical activity and nutritional status as risk factors for noncommunicable diseases among women of reproductive age. A descriptive quantitative study with a cross-sectional approach was conducted in Kranggan Village involving 35 respondents selected through purposive sampling. Data on physical activity were collected using questionnaires, while nutritional status was assessed based on Body Mass Index (BMI). The findings showed that most respondents had moderate physical activity levels (51.4%), followed by low physical activity levels (42.8%). Regarding nutritional status, the majority of respondents were classified as overweight (51.4%) and obese (28.6%). Statistical analysis demonstrated a significant relationship between physical activity and nutritional status (p = 0.003). The results indicate that inadequate physical activity is associated with increased nutritional status problems, particularly overweight conditions. Therefore, low physical activity and excessive body weight represent interconnected risk factors contributing to the development of noncommunicable diseases among women of reproductive age. This study highlights the importance of promoting regular physical activity and maintaining balanced nutritional status as preventive strategies to reduce the risk of noncommunicable illnesses.

The high number of elderly people has led to various health problems that must be faced. However, there are still elderly people who are reluctant to carry out regular physical activity, so the health status and quality of life of the elderly also decline. Aims: This systematic review aims to identify the relationship between social cognitive theory (SCT) on physical activity in the elderly. Methods: This systematic review method approach is based on PRISMA. This systematic review examines several research articles from journal databases, namely PubMed and ScienceDirect, and obtained 13 articles in 2019-2024. The keywords used in the search are “Social Cognitive Theory”, “SCT”, “Physical Activity”, “PA”, and “Elderly”. The articles reviewed met the inclusion criteria, namely relevant article topics, original research articles in English, and publications in the last five years. The eligibility criteria were then assessed separately using the JBI Critical Appraisal Checklist tool.  Results: From a total of 13 articles reviewed, it can be concluded that the majority of articles explain how important the social cognitive patterns that elderly people must have in relation to the physical activity of the elderly, such as predicting the physical activity of the elderly, increasing the exercise behavior of the elderly, influencing the level of physical activity for people with chronic diseases, and adjusting physical activity with the abilities of the elderly. The higher an elderly person's social cognition, self-efficacy, encouragement, and social support to be able and willing to carry out physical activities in accordance with the elderly's abilities and physical condition. Conclusion: The social cognition of the elderly places more emphasis on the ability of the elderly to learn things around them, so that the elderly have self-efficacy, encouragement, and social support to do things in according to their goals and beliefs. Health workers in provide health services to the community, social cognitive theory can be used for alternative to increase the physical activity of the elderly. A personalized smartphone-based intervention based on SCT is highly effective for promoting physical activity in older adults.  

The rapid development of information technology has created new challenges for military organizations, including the increasing accessibility of online gambling among military personnel. This study aims to analyze the optimization of mental development programs for Indonesian Navy personnel at the Naval Academy as an effort to prevent online gambling behavior. The study employed a descriptive qualitative approach using interviews, observations, documentation, and questionnaires. Data were collected from military leaders, military police personnel, mental development officers, and Naval Academy personnel. The findings indicate that mental development programs have been implemented through religious guidance, counseling, lectures, and character-building activities, which generally receive positive responses from personnel. However, several obstacles remain, including limited participation due to operational activities, rapid technological advancement, easy internet access, and the absence of specific educational materials concerning online gambling. Factors influencing personnel involvement in online gambling include low self-control, unproductive use of leisure time, environmental influences, and personal economic problems. The study concludes that mental development can effectively prevent online gambling when implemented continuously, supported by leadership involvement, digital literacy enhancement, supervision of technology use, and specific educational materials addressing the dangers of online gambling.

Personal hygiene practices during menstruation is important to maintaining the reproductive health of adolescent girls and preventing reproductive organ infections. Poor hygiene causes post-menstrual problems in 5.2 million adolescents in Indonesia, such as reproductive tract infections, urinary tract infections, pathological vaginal discharge, fungal infections, genital area irritation, and unpleasant odor. Factors influencing personal hygiene practices during menstruation include knowledge, perceptions, attitudes, and infrastructure. This study was aimed determine the relationship between knowledge, perceptions, attitudes, and infrastructure and personal hygiene practices during menstruation among female students at the Daarussa'adah Qur'an Tahfidzil Islamic Boarding School in Pesawaran in 2026. This study was quantitative with a cross-sectional approach. The population was all female students at the Daarussa'adah Qur'an Tahfidzil Islamic Boarding School in Pesawaran, and a sample of 74 respondents was selected using total sampling. Data analysis used the chi-square test with a significance level of 95%. The results of the study showed a relationship between knowledge (p-value = <0.001; OR = 279.000), perception (p-value = <0.001; OR = 620.000), attitude (p-value = <0.001; OR = 165.333), and infrastructure (p-value = <0.001; OR = 0.002) and personal hygiene behavior during menstruation. Suggested for the Islamic boarding schools include routinely improving reproductive health education regarding personal hygiene during menstruation and providing adequate infrastructure to support the development of good knowledge, perceptions, and attitudes, so that female students can optimally implement personal hygiene behaviors during menstruation.