Publication Search

Karies gigi termasuk penyakit infeksi kronis yang biasanya terjadi akibat bakteri kariogenik yang menempel pada gigi yang akan memetabolisme gula sehingga menghasilkan asam, yang seiring dengan waktu akan mendemineralisasi struktur gigi. Anak-anak usia sekolah sangat menyukai makanan dan minuman manis dengan kandungan glukosa tinggi, dan sering kali kurang memahami teknik menggosok gigi yang benar, serta jarang memeriksakan gigi mereka ke fasilitas kesehatan. Kegiatan ini bertujuan untuk meningkatkan pengetahuan dan keterampilan siswa tentang cara menggosok gigi yang baik dan benar serta pentingnya menjaga kesehatan gigi dan mulut. Kegiatan dilaksanakan pada hari Rabu, 8 Oktober 2025 mulai pukul 08.00 WIB di SD Negeri Bakalan 01, Kecamatan Polokarto dengan peserta sebanyak 25 siswa. Siswa diberikan soal pre-test dan post-test untuk mengetahui pengetahuannya terhadap kesehatan gigi dan rongga mulut sebelum dan setelah diberikan edukasi, serta dilakukan demonstrasi cara menggosok gigi yang benar. Hasil pre-test dan post-test menunjukkan adanya peningkatan pengetahuan siswa tentang kesehatan gigi dan mulut.

Vocational education requires a practice-based learning process supported by complete facilities so that students can master work competencies optimally. However, the condition of the Motorcycle Engineering workshop at Noemuti State Vocational High School shows that the completeness of the disc brake system practice facilities does not meet the ideal ratio standards, which affects the effectiveness of learning. This incompleteness has an impact on the low achievement of students' practical learning outcomes that have not reached the KKM. This study aims to describe the level of completeness of workshop facilities and the results of the disc brake system practice learning, and to determine whether there is a relationship between the two. The research approach uses a quantitative correlational method with a total sampling of 26 students. Data were obtained through observation, questionnaires, and documentation, then analyzed using descriptive statistics, normality tests, linearity tests, Pearson correlations, and coefficients of determination using SPSS 27. The results showed that the average completeness of workshop facilities was 42.27 and the results of practical learning were 42.81, both of which were in the good category. The Pearson correlation test produced a value of r = 0.960 with a significance of 0.000 (<0.05), indicating a very strong and significant relationship. The coefficient of determination (R² = 0.92) shows that 92% of the variation in practical learning outcomes is influenced by the completeness of workshop facilities. The more complete the workshop facilities, the higher the students' practical learning outcomes.

This study aims to improve the effectiveness of facility arrangement at Pabrik Oncom Bu Nana by analyzing interactions among production activities and designing spatial layouts based on their priority levels. The current layout presents several critical issues, particularly because the equipment sanitation area is combined with the toilet, creating a significant risk of contamination and reducing hygiene during production. In addition, irregular material flow and excessive worker movement lead to inefficient work processes and may affect the quality of the final product. To address these issues, this study employs the Activity Relationship Chart (ARC) to evaluate the functional closeness among production areas, as well as the Total Closeness Rating (TCR) to determine facility placement priorities based on the intensity of inter-stage relationships. The results of the ARC analysis indicate that the fermentation room has the strongest link to the main stages of oncom production, requiring its placement to be closer to the preparation and molding areas. Findings from the TCR further emphasize that fermentation should become the primary focus in the layout redesign. Based on both methods, a more organized layout design is proposed by relocating the fermentation room to the beginning of the production flow, separating the toilet and sanitation room into two distinct areas, and restructuring the storage, molding, and drying spaces. This redesigned layout is expected to enhance cleanliness, improve material flow, and strengthen the operational effectiveness of Pabrik Oncom Bu Nana.

This study analyses the challenges of digitalising registration services at Primary Healthcare Facilities (Fasilitas Kesehatan Tingkat Pertama, FKTP) in East Java, including limitations in human resources, technological infrastructure, and public digital literacy, all of which affect the satisfaction of National Health Insurance (Jaminan Kesehatan Nasional, JKN) patients. Utilising the Systematic Literature Review (SLR) methodology with the PRISMA approach, the study reviews literature from 2024–2025 sourced from databases such as Google Scholar, using keywords related to digitalisation, FKTP, and patient satisfaction. The analysis is based on the ADO (Antecedent, Decision, Outcome) framework. The findings identify three key factors: (1) Antecedents (human resource competence, infrastructure, digital literacy); (2) Decisions (human resource training, facility modernisation, public outreach); and (3) Outcomes (increased patient satisfaction through time efficiency and ease of access). The study emphasises the need to strengthen human resources, provide adequate infrastructure, and educate the public to ensure the sustainability of digital healthcare services at FKTPs in East Java.

This study aims to determine the effect of library facilities on students' interest in reading books in economics for grades 10, 11, and 12, majoring in social studies at SMA Negeri 1 Kabila, Bone Bolango Regency, Gorontalo Province. This study used a quantitative approach. Data collection methods used in this study were observation, documentation, and questionnaires. Based on the description above, the population in this study was 489 students in grades 10, 11, and 12 majoring in social studies at SMA Negeri 1 Kabila. The sample in this study was grades 10, 11, and 12. The analytical method used was simple linear regression. The results showed an effect. The results obtained a R-squared coefficient of 0.258. This value means that 25.8% of the variability in the variable of interest in reading economics textbooks for grades 10, 11, and 12 majoring in social studies at SMA Negeri 1 Kabila, Bone Bolango Regency, Gorontalo Province can be explained by library facilities, while the remaining 74.2% is influenced by other variables not examined in this study.

Program pengabdian ini menjawab kesenjangan kapasitas UMKM di Desa Plelen sebagai desa penyangga Kawasan Industri Terpadu Batang (KITB), khususnya pada aspek kualitas produk, keterampilan manajerial, dan kelembagaan ekonomi masyarakat. Tujuan utama kegiatan adalah meningkatkan kesiapan UMKM dalam memanfaatkan peluang ekonomi industri melalui: (1) peningkatan kualitas produk dan kemasan; (2) pelatihan manajemen usaha dan penyusunan business plan; serta (3) fasilitasi pembentukan Koperasi Merah Putih sebagai wadah ekonomi kolektif. Pendekatan Pembelajaran Berbasis Partisipatif diterapkan untuk memastikan keterlibatan masyarakat dalam seluruh tahapan program. Hasil pendampingan menunjukkan peningkatan signifikan pada diversifikasi produk, standar higienitas produksi, literasi bisnis, serta terbentuknya koperasi yang berfungsi mendukung pemasaran dan keberlanjutan usaha. Dengan demikian, model pemberdayaan terintegrasi yang menguatkan aspek teknis, manajerial, dan kelembagaan terbukti efektif dalam mempersiapkan desa penyangga menuju transformasi sosial-ekonomi yang inklusif dan adaptif terhadap industrialisasi.

PT Mandiri Banana Indonesia still requires further development and arrangement of its layout and facilities to enhance the efficient and optimal use of land. This study aims to determine whether the existing layout at PT Mandiri Banana Indonesia is effective in supporting operational flow and the uninterrupted progression of the production process. The research adopts a quantitative descriptive approach, which is used to measure the correlation between activities through the Activity Relationship Chart (ARC) and Total Closeness Rating (TCR) methods. These methods enable the analysis to be presented in a measurable and objective manner as a basis for improving the facility layout. This study proposes a new layout design for the main production area and supporting facilities. The proposed layout is based on the results of ARC and TCR analyses, which indicate several critical spatial interrelationships among the facilities. Based on the findings and discussion regarding the application of the Activity Relationship Chart (ARC) and Total Closeness Rating (TCR) in designing the facility layout at PT Mandiri Banana Indonesia, it may be inferred that layout improvement exerts a significant impact on enhancing workflow efficiency and the overall work environment. The proposed alternative layout is expected to achieve a safer, more hygienic, and more productive spatial arrangement by establishing a clear separation between the production zone, administrative zone, and supporting areas.

This study discusses the application of the law to the alleged facilitation of online gambling transactions by PT Espay Debit Indonesia Koe (DANA), which allegedly distributed funds of IDR 5.37 trillion in illegal activities. This case is in the spotlight because it shows the weakness of the digital financial supervision system in Indonesia and raises questions about the limits and forms of legal accountability of fintech operators in preventing misuse of services. The research method used is normative juridical with a descriptive qualitative approach, using primary, secondary, and tertiary legal materials to analyze applicable regulations and supervisory practices. The results of the study show that although DANA does not directly commit a criminal act of gambling, negligence in implementing transaction supervision mechanisms, including monitoring suspicious transaction patterns, can give rise to certain forms of legal liability. These findings underscore the importance of prudence and compliance with anti-money laundering regulations in fintech operations. This study recommends strengthening fintech regulations, implementing stricter Know Your Customer (KYC), increasing synergy between OJK, PPATK, and the Police, and establishing a more integrated and responsive digital transaction supervision system to prevent similar crimes in the future.

This study aims to analyze the spatial patterns of ambulance transport demand in Semarang City based on patients’ origin subdistricts, origin villages, and destination healthcare facilities. The analysis employed the K-Means Clustering algorithm as a data mining method to group areas according to similarities in the volume of ambulance requests. The dataset consisted of ambulance transport service records from January 2024 to September 2025, obtained from the Semarang City Health Office. The analytical procedures included data cleaning, normalization, determination of the optimal number of clusters using the Elbow Method, and cluster formation using K-Means. The results show two main clusters for subdistricts and destination healthcare facilities. High-demand subdistricts were generally densely populated areas such as Banyumanik and Pedurungan, with an average of 1,256 requests, while RSUP Dr. Kariadi emerged as the dominant referral facility with 3,893 requests. Meanwhile, village-level origins formed three clusters, with average demands of 549 (high), 190 (medium), and 36 (low). These findings are expected to support strategic planning for equitable ambulance fleet distribution and improved efficiency of patient transportation services in Semarang City.

This study aims to deltelrminel thel influelncel of work facilitiels, compliancel, and compeltelncel on elmployelel pelrformancel at thel Bungku Sellatan Subdistrict Officel. Thel samplel useld in this study consists of 39 elmployelels from thel Bungku Sellatan Subdistrict Officel. Thel sampling telchniquel elmployeld is non-probability sampling, spelcifically celnsus sampling. Thel data analysis telchniquel useld is multiplel linelar relgrelssion analysis. Baseld on thel data analysis relsults, thel relgrelssion elquation obtaineld is as follows: Y = 0.554 + 0.164 X1 + 0.142 X2 + 0.259 X3. Thel relsults of this study indicatel that work facilitiels, compliancel, and compeltelncel havel a significant influelncel on elmployelel pelrformancel at thel Bungku Sellatan Subdistrict Officel simultanelously. Furthelrmorel, individually, both thel work facilitiels variablel, thel compliancel variablel, and thel compeltelncel variablel significantly affelct elmployelel pelrformancel at thel Bungku Sellatan Subdistrict Officel. Thel coelfficielnt of deltelrmination shows an R squarel valuel of 0.588, indicating that 58.8% of elmployelel pelrformancel is influelnceld by thel variablels of work facilitiels, compliancel, and compeltelncel, whilel thel relmaining 41.2% is influelnceld by othelr factors not elxamineld in this study.

Health care facilities are places used for promotive, preventive, curative, and rehabilitative health services carried out by the government and the community. Calculating the germ count on door handles of healthcare facilities is very important, because patients are not aware that the door handles contain and transmit germs that cause infections. This study aims to determine the percentage of germ contamination on door handles of healthcare facilities at X Hospital and X Community Health Center. The type of research conducted is descriptive quantitative with an observational case report approach. This study is a frequency distribution in tabular form using a percentage formula. The number of samples used by the researchers was 8 samples, using 4 sampling points at the Hospital and 4 sampling points at the Community Health Center (Puskesmas): the Emergency Room, Main Door, Pharmacy Room, and Laboratory Room. Data collection by conducting laboratory tests on door handle swab samples was then examined using the ALT method. The results showed that the percentage of door handles that did not meet ALT standards was 3 samples (75%) at X Hospital. Meanwhile, on door handles at health facilities Puskesmas. The percentage of door handles at Puskesmas was obtained 4 samples (100%) at X  Puskesmas. Door handles at health facilities do not meet the standards of the Republic of Indonesia's Minister of Health Decree No. 1204 / MENKES / SK / X / 2004, the decision Ho was accepted H1 was rejected.

Halal tourism has continued to grow as a highly attractive segment for Muslim travelers, particularly in the provision of Sharia-compliant accommodation such as Islamic hotels. This study aims to examine consumer perceptions of halal food-and-beverage facilities and Sharia-based operational standards in Islamic hotels across the Greater Jakarta area (Jabodetabek). A descriptive quantitative approach was employed, involving 150 respondents who had stayed in Sharia hotels. Data were collected through closed-ended Likert-scale questionnaires and analyzed using the Weighted Mean Score (WMS) technique to evaluate respondents’ assessments of each indicator. The results indicate that consumer perception of halal food-and-beverage facilities falls into the very high category, with average scores exceeding 4.838. Consumers acknowledged that Sharia hotels maintain halal assurance, hygiene, and food safety through proper processing and the availability of halal certification. Regarding operational aspects, consumer perception is also classified as very good, with an average score of 4.606, particularly for policies prohibiting unmarried couples from sharing a room and banning entertainment deemed inappropriate or immoral. However, the use of Sharia-compliant financial institutions still requires improvement. Overall, the findings affirm that Sharia hotels in Jabodetabek have successfully implemented most Sharia principles, although further enhancement of internal operational practices is needed to achieve more comprehensive Sharia compliance.

This study aims to analyze the impact of facilities, security, and services of the Syahbandar office on the satisfaction of fishermen at the Pantai Fishing Port (PPP) Tegalsari, Tegal City. The research method used is a quantitative approach with an associative model, where data is collected through a questionnaire distributed to 100 fishermen operating at PPP Tegalsari. Data analysis is performed using SPSS version 26 with validity and reliability tests, multiple linear regression, t-test, F-test, and coefficient of determination (R²). The results show that, simultaneously, the variables of facilities, security, and services have a positive and significant impact on fishermen’s satisfaction. Partially, the service variable has the most dominant influence on fishermen’s satisfaction compared to the facilities and security variables. This indicates that improving the quality of services at the Syahbandar office, providing adequate port facilities, and ensuring security at the port are key factors in creating fishermen’s satisfaction. This study is expected to provide input for port managers to enhance public service quality in the fisheries sector and promote policies that better address the needs and comfort of fishermen in their activities at the port.

Sanitation facilities are a fundamental element that contributes to creating a healthy, comfortable, and productive learning environment in higher education institutions. This study aims to describe the availability of sanitation facilities in the Office Administration Management Study Program, analyze the factors that influence their condition, and explore the perspectives of the academic community regarding their quality and usefulness. A qualitative descriptive approach was employed, with data collected through field observations, in-depth interviews, and documentation. The informants of this study consisted of students, lecturers, administrative staff, and facility managers. The findings reveal that sanitation facilities such as toilets, sinks, and trash bins remain inadequate in terms of quantity, physical condition, and distribution within the campus area. Several key challenges were identified, including limited financial resources, suboptimal management practices, low awareness and discipline among users, and the absence of clear and strict institutional policies related to sanitation standards. The academic community generally perceives that the available sanitation facilities do not meet the expected standards of comfort and hygiene, which may negatively affect the quality of learning experiences and academic activities. This study highlights the importance of strategic planning, adequate budget allocation, and supportive institutional policies in improving the quality of sanitation facilities. The implications of the study are expected to provide valuable input for higher education managers in formulating policies and planning facilities that are more responsive to the needs of the academic community, thereby supporting effective, professional, and sustainable educational governance.

This study analyzes the influence of internal operational variables—Process, Service Quality, and Facilities—on the Export Performance of PT. Panah Perdana Logisindo, a freight forwarding company in Semarang. Maritime logistics plays a crucial role in national competitiveness, but company performance often faces challenges amidst the complexity of global supply chains . Employing a quantitative approach with a sample of 100 export service users, multiple linear regression analysis indicates that all three independent variables positively and significantly affect Export Performance (Y). The results reveal that Process has the most dominant influence (\beta=0.309), followed closely by Facilities (\beta=0.302) and Service Quality (\beta=0.255). The model explains 53.0% of the variance in the company's Export Performance (Raja Ferry, 2025 2). These findings confirm the necessity of strengthening micro-operational aspects (efficient procedures, robust networks, and staff professionalism) as a core strategy for enhancing profitability and customer loyalty amidst macro-logistical challenges in Indonesia.

The Effect of Facilities on Customer Satisfaction at Pondok Parsotoan Sidojadi 2, Panyabungan, Mandailing Natal Regency.”This study examines the effect of facilities on customer satisfaction at Pondok Parsotoan Sidojadi 2, Panyabungan. Facilities include infrastructure, amenities, and conveniences that support business operations, while customer satisfaction refers to the feelings of pleasure or disappointment experienced by customers based on the comparison between their expectations and actual experiences with products or services. The research problems involve inadequate facilities, such as the absence of Wi-Fi and a children’s playground, a small prayer room, limited parking space, narrow stairs, and less aesthetic décor, which reduce customer satisfaction. This study uses a quantitative method with data collected through observation and questionnaires from 96 respondents. Data analysis was conducted using SPSS 25.0, including validity, reliability, normality, heteroscedasticity, simple linear regression, t-test, determination test, and correlation analysis. The t-test results show thitung = 28.981 > ttable = 1.661, indicating that facilities have a positive and significant effect on customer satisfaction. The R Square value of 0.899 (89.9%) and R of 0.948 demonstrate a very strong relationship.  

This think about focuses to analyze the affect of traveler attractions, Advancement, and facilities on the choice to visit the Saung Z guest interest in Karang Tanding Town, Empat Lawang Run the show. This consider is impelled by the potential of sharia tourism as an effort to make neighborhood tourism that prioritizes Islamic values. This consider livelihoods fundamental data with a quantitative approach. The people in this consider is generally 18,000 visitors per year. The reviewing of this consider was carried out by purposive testing with a include up to of 100 respondents going to the guest interest. The examination methodology utilized in this consider is authenticity testing, faithful quality, classical assumption testing, and hypothesis testing utilizing IBM SPSS 22 examination. The results of this study show that tourist attractions, promotions, and facilities have a positive and significant influence on the decision to visit. The proposals of the comes around of this consider are the noteworthiness of more fruitful constrained time strategies, most extraordinary organization of traveler attractions and making strides the quality of workplaces that back guest reassurance in the midst of their visits and to draw in guest captivated This ask approximately is expected to contribute to the advancement of the tourism fragment, especially in Empat Lawang Run the show.

The practice of naming rights through trademark licensing agreements on public facilities has become a common commercialisation strategy in Indonesia. However, when the object of naming rights is a public facility with cultural heritage status, legal uncertainty arises due to the absence of specific regulations governing the intersection between Law No. 20 of 2016 concerning Trademarks and Geographical Indications and Law No. 11 of 2010 concerning Cultural Heritage. The objective of this study is to analyse the regulation of naming rights on public facilities with cultural heritage status and to identify any differences in the application of trademark law in the cases of Semarang Tawang Station and Cirebon Kejaksan Station. The study employs a normative juridical method, utilising secondary data collection techniques and is supported by tertiary legal materials, employing a legislative, analytical and comparative approach. The results of the study indicate a discrepancy in the regulatory framework for naming rights concerning cultural heritage, leading to legal ambiguity due to inconsistent implementation. This is exemplified by the contrasting outcomes at Semarang Tawang Station, where the naming rights agreement with Bank Jateng was successfully executed, and at Cirebon Kejaksan Station, where the agreement was terminated despite both stations possessing cultural heritage status. The study recommends the introduction of comprehensive special regulations to harmonise the protection of exclusive trademark rights with the preservation of the identity and historical value of cultural heritage sites.  

This study aims to analyze the influence of work facilities, competence, and work conflict on employee productivity at UD Karya Pala Kediri, both partially and simultaneously. The research employed a quantitative approach with a causal associative design. The population consisted of 36 employees, all of whom were included as respondents using a saturated sampling technique. Data were collected through questionnaires using a five-point Likert scale and analyzed using validity, reliability, classical assumption tests, and multiple linear regression analysis. The results indicate that work facilities, competence, and work conflict have a positive and significant effect on work productivity, both partially and simultaneously, with a coefficient of determination (R²) value of 0.862. This means that 86.2% of the variation in work productivity is explained by these three variables, while the remaining 13.8% is influenced by other factors outside the research model. The findings highlight that improving employee productivity can be achieved through adequate work facilities, continuous competence development, and constructive conflict management within the workplace.

Working at heights refers to performing tasks in elevated locations, which pose a risk of injury to workers in the event of a fall. To reduce the number of accidents caused by working at heights, one of the necessary steps is conducting hazard and risk assessments using the Job Safety Analysis (JSA) method. JSA is an analytical method used to identify hazards at the workplace and find ways to reduce the risks of accidents. The purpose of this study is to assess the completeness of safety equipment for working at heights, to explain hazard identification, to analyze risks in building structure work, to determine criteria and hazard assessments, and to understand risk control in building structure, plumbing, and electrical work according to the Job Safety Analysis (JSA) method in healthcare facility buildings in Semarang. The results of the study show that the risk level, calculated using the Risk Rating Number (RRN), for all potential hazards in structure, plumbing, and electrical work, reveals the following: for structure work, three hazards fall into the extreme category (43.84%), one hazard falls into the high category (16.44%), four hazards fall into the medium category (39.73%), and no hazards fall into the low category (0%); for plumbing work, three hazards fall into the extreme category (38.55%), one hazard falls into the high category (14.46%), five hazards fall into the medium category (46.99%), and no hazards fall into the low category (0%); and for electrical work, three hazards fall into the extreme category (44.74%), three hazards fall into the high category (31.58%), three hazards fall into the medium category (21.05%), and one hazard falls into the low category (2.63%).