Publication Search

The purpose of this study was to determine the effect of the online shop on the intention to buy goods online in students of the Faculty of Economics, Indonesian Christian University, Toraja. The type of research used is descriptive quantitative. The data analysis technique used in the study of the influence of the online shop on the interest in buying goods online is simple linear regression analysis, using validity tests, reliability tests and hypothesis testing. Furthermore, the data were analyzed using IBM SPSS Statistics software version 23. The independent variable (X) in this study was Online Shop and the dependent variable (Y) was Purchase Interest. There is a significant effect between the Online Shop on Buying Interest, it is known that based on the calculation results of the value 2.353> 2.035 with a significant value of 0.025 <0.05, then HO is rejected and H1 is accepted which means there is a significant (significant) effect between the Online Shop variable (X) and Purchase Interest variable (Y)

The scope of this study focuses on work motivation (X1) and non-physical work environment (X2) variables on the dependent variable, namely employee performance (Y). The population of employees of PT. Mitra Distribusi Mandiri Sungai Pareman Branch Makassar as many as 30 people. This research uses quantitative methods.The sampling technique uses a saturated side approach. Data analysis techniques used in this study are validity and reliability test instruments, classic assumption test, multiple linear regression test, coefficient of determination, t test and F test. From the results of this study that the variable work motivation has a partially significant effect on employee performance, this can be seen from the significant t value of 0,000 < 0,05. The non-physical work environment has a partially significant effect on employee performance, this can be seen from the significant t value of 0,000 < 0,05. Simultaneously work motivation and non-physical work environment have a significant influence on employee performance, this can be seen from the significant F value of 0,000 < 0,05.

One of the automatic sink products was made by Yogyakarta Technology University students. It is felt that this automatic sink product needs to be tested for its usability or ease of use. The USE questionnaire was used to carry out this test, and five test parameters were used. specifically, learning ability, efficiency, memory, error avoidance, and satisfaction. Based on its use, the purpose of this paper is to find out the user's opinion about the automatic sink product. The distribution of the USE questionnaire consisting of ten questions and five rating points on a Likert Scale was used to conduct this kind of quantitative descriptive research on consumers of automatic sink products. This study obtained usability measurement results for automatic sink products with a value of 84.67% on learnability, 96.22% on efficiency, 82.44% on memoriability, 88% on errors and 76.88% on satisfaction.

This study aims to determine the effect of social media marketing variables (X1) and service quality (X2) on purchasing decisions (Y) at PT Mahakarya Paket Digital. This type of research is quantitative research. Data collection techniques used are primary data and secondary data. The sample selection used the accidental sampling method, a sample of 55 respondents at PT Mahakarya Paket Digital. The analysis technique used is validity test, reliability test, classic assumption test, multiple linear regression analysis, t test, F test and coefficient of determination test. From the results carried out in the study, it showed that product quality (X1) and price (X2) variables on customer satisfaction (Y) at PT Mahakarya Kemasan Digital. The results of the study obtained a linear regression equation for social media marketing variables that have a partially significant effect on purchasing decisions. Quality of Service has a significant effect on purchasing decisions partially. The results of the Social Media Marching F test and Service Quality have a simultaneous and significant effect on Purchasing Decisions at PT Mahakarya Paket Digital.

The main focus of this research is to know and analyze the level of student satisfaction in services at the library at the Muhammadiyah University of Jambi. The data in this study were obtained based on primary data using surveys in collecting data through questionnaires. The number of samples is 100 respondents who are students of Jambi Muhammadiyah University. The variables in the study used 5 dimensions of service quality consisting of reliability, responsiveness, assurance, empathy and tangibles as measured using a Likert scale. The results showed that the importance and quality of service indicated that student respondents in using library services were satisfied with the services provided by the Jambi Muhammadiyah University library. In addition, the results of the analysis in this study showed that the average respondent's answers related to student satisfaction with library services at Jambi Muhammadiyah University were at a value of 4.5, which means that respondents were very satisfied in using library services at Jambi Muhammadiyah University.

This study aims to determine the effect of product quality (X1), advertising (X2) and service quality (X3) on consumer satisfaction (Y) at KPRI Sedar Ngancar, Kediri Regency. This type of quantitative research. Data collection techniques primary data and secondary data. The sample selection used the accidental sampling method, the number of samples in the study was obtained by 80 respondents. Data were obtained through questionnaires, interviews, and literature studies. The analysis techniques used were validity test, reliability test, classical assumption test, multiple linear regression analysis, t test, F test and coefficient of determination test. The research results obtained multiple linear regression equation Y = 1.167 + 0.323X1 + 0.402X2 + 0.215X3 and the results of the t-test variable product quality have a partially significant effect on customer satisfaction. Advertising partially significant effect on customer satisfaction. Service quality has a partially significant effect on customer satisfaction. The results of the F test obtained Fcount results with a significance value of 0.000 <0.05. From the results of the analysis it can be concluded that product quality, advertising and service quality have a simultaneous and significant effect on consumer satisfaction at KPRI Sedar Ngancar, Kediri Regency.

The purpose of this study was to determine the effect of experiential marketing (X) on interest in repurchasing (Y) milo cheese at Kopiria Tanah Grogot. The sample in this study were consumers or buyers of Milo cheese at Kopiria in Tanah Grogot. The sampling technique in this study was purposive sampling and the number of samples in this study were 60 people. Consumers or buyers as a sample of this study were given a questionnaire consisting of 21 questions. Responses to the questionnaire were tested for validity and reliability prior to multiple linear regression analysis using the statistical product and service solution (SPSS) application.The results of the validity test stated that all statements consisting of 21 items were valid because rcount>rtable (0.2542). The results of the reliability test for all questions stated that reliability was acceptable because the Cronbach'alpha value> 0.6 or 0.791> 0.6.The results of multiple linear regression analysis obtained the regression equation, namely Y = 0.758 +- 0.035 X1+0.430X2 +- 0.007X3 + 0.461X4 + -0.015X5. Coefficient value correlation (R) of 0.783 means that between experiential marketing (X) has a strong relationship to repurchase intention (Y). The coefficient of determination (Adjusted R2) is 0.634, meaning that the variation in the experiential marketing variable (X) can contribute to repurchasing interest (Y) Milo cheese at Kopiria Tanah Grogot is 63.4% while the rest is explained by other factors not examined at (100- 63.4)% = 36.6%. The simultaneous results (F test) show that the value of Fcount>Ftable (17.150>2.38) so it can be concluded that there is an influence between the experiential marketing variable (X) on repurchase intention (Y). Then the results of the partial test (t test) show that the value of tcount > ttable on feel (X2) is 5.193> 2.004 and action (X4) is 4.567 > 2.004 which means there is an influence on repurchasing interest (Y) Milo cheese at Kopiria Tanah Grogot while the value tcount < ttable on sense (X1), think (X3) and relate (X5) which means there is no effect on repurchasing interest (Y) Milo cheese at Kopiria Tanah Grogot..

This research was conducted at the Grand Dian Hotel Brebes which aims to analyze and explain the influence of service quality, image and function of OTA (online travel agent) which is in poor condition due to lack of updates from OTA (Online Travel Agent) about hotel information, and prices from OTA (Online Travel Agent) is unstable. Research data obtained through questionnaires and interviews. The sample used in the study were 94 respondents. The research results are expected to provide useful information for management and employees. The data obtained were processed using descriptive analysis and quantitative statistical analysis. Quantitative analysis used multiple regression analysis to determine the effect of the independent variable on the dependent variable, test the model, test the hypothesis, and before doing the test, the validity and reliability tests were carried out first. The results of the regression analysis show that the increase in guest decisions to stay is directly influenced by the quality of service, image and function (online travel agent). The results of the multiple regression analysis test showed a significant F value, with a correlation value of determination adjusted R2 square of 0.610. This shows that the quality of service, image and function (online travel agent) significantly influence the decision of guests to stay together with a close relationship of 61.0%. This shows that to improve the decision of staying guests, it is necessary to improve the quality of service, as well as the image and function of a good OTA (online travel agent) in the eyes of the community, it will increase the decision of guests to stay in the next period.

This study aims to examine the influence of organizational culture and complexity duties on the performance of apprentices and probation participants at the Public Accounting Firm (KAP). This research is still relevant as evidenced by the existence of cases of fraud and audit failures caused by the performance of auditors in public accounting firms that have not been optimum. The research technique used was a questionnaire with 76 auditors as respondents from Public Accounting Firms in Indonesia. The auditors come from active students or alumni of UNPAR accounting who are apprentices and alumni who have attended probation at KAP. The research method used in testing the hypothesis is validity and reliability testing, multiple linear regression, F test (simultaneous), and t test (partial) with the independent variables namely organizational culture and task complexity while the dependent variable is auditor performance at KAP. The results of data processing show that all independent variables in this study which include organizational culture and task complexity have a significant effect both partially and simultaneously on auditor performance. With this research, the researcher hopes that further researchers can expand this research by adding other variables that are factors that influence the performance of an auditor

Machine maintenance must be carried out as a support for the reliability of a machine so that the production system can run smoothly to meet production needs. The fundamental problem of this study is in PT XYZ with the Roll Table 5Q machine, which frequently experiences sudden damage caused by critical components. The goal of the study was to determine the maintenance time interval of the 5Q Roll Table machine, the optimal age of the machine, and the number of mechanics based on the minimum total maintenance cost in an effort to improve the reliability of the machine using the Reliability Centered Maintenance (RCM) II methods and Life Cycle Cost (LCC) methods. From the results of research for critical components As Roll Table obtained interval value of 331 hours / 13 days once a year with the selection of action is Scheduled restoration task and for Bearing components obtained interval value of 109 hours/5 days once a year with the selection of action is Scheduled on-condition task. From the calculation of the total life cycle cost of Rp. 3,720,459,386 with the optimal number of mechanics on the Roll Table machine as many as 3 mechanics with an efficiency level of 9.63% with an optimal age for the Roll Table machine 5Q is 12 years.

User satisfaction is a feeling obtained from previous expectations either to be better or very adequate in a service. Services using self check-in machines can simplify and shorten users or prospective passengers in carrying out their activities at the airport. In this study, the research objective was to find out the satisfaction of using a self check-in machine at Yogyakarta – Kulonprogo International Airport. The research entitled Analysis of Satisfaction Using Self Check-In Machines at Yogyakarta International Airport - Kulonprogo, was conducted by distributing questionnaires to users of self check-in machines at Yogyakarta International Airport. This research uses quantitative research methods. Data analysis techniques use the validity test, reliability test, and analysis to determine the average level of satisfaction. The results showed that satisfaction with the use of self check-in machines at Yogyakarta International Airport was high. Evidenced by the results of the evaluation for the conformity of expectations indicator obtaining an evaluation value of 4.39, the intention to reuse indicator obtaining an evaluation value of 4.2733, and the availability indicator recommending obtaining an evaluation value of 4.18.

PT. Semen Indonesia (Persero) Tbk is a company that produces cement and runs the production process 24 hours a day. The company uses Roto Packer in its packaging process. In carrying out machine maintenance efforts, the company has implemented a maintenance system, namely preventive maintenance. However, even though preventive maintenance has been carried out, the company still experiences downtime on the spring load cell components. Therefore, it is necessary to carry out an analysis in order to determine the time between breakdowns, breakdown times, and arrange optimal maintenance schedules for spring load cell components. This study uses the Reliability Centered Maintenance (RCM) method with the Kolmogorov-Smirnov test to develop preventive maintenance activities that have been scheduled by the company. The results obtained, for the spring load cell component, component replacement must be carried out every 4 days with a replacement time of 49 minutes and a reliability of 39.87%.

This study aims to analyze the detection of compliance audits of inventory accounting information systems at retail stores through internal control. An inventory accounting information system is a critical element of retail store operations, and adherence to proper procedures is critical to maintaining the integrity and reliability of inventory data. The research method used is a literature study and descriptive analysis. Data was collected through a literature review related to compliance audit detection. This research also includes a case study to illustrate the application of internal control in the detection of compliance audits in inventory accounting information systems. By implementing proper internal controls, retail stores can minimize the risk of fraud, errors, and losses associated with inventory. This research also shows the need for increased awareness and understanding regarding audit compliance detection among auditors and accounting professionals involved in the retail industry.

Miwon Indonesia is one of the companies that started as a company in 1973, the company finally changed the company's name with PT. Daesang Ingredients Indonesia The research method used is Preventive Maintenance, in this study researchers analyzed the time between laminating machine damage to the Chamber Box Heater component, the data taken was the Laminating machine down time data in July – December 2022 The results of analysis and data processing showed that the level of component reliability, namely for the chamber box heater component of 0.5892 occurred on day 5. And while the press roll rewinder component obtained a reliability level of 0.5925 on day 7. And the results of the calculation of costs before preventive maintenance are obtained at a cost of Rp. 47,953,572 per 6 months and costs after preventive maintenance are obtained at Rp. 29,677,876 per 6 months. With a difference of Rp.18,285,696. From the results of preventive maintenance costs, it can reduce maintenance costs at PT. Daesang Ingredients Indonesia than before preventive maintenance calculations are carried out.

PT. Z is one of the companies that produces steel plates located in Surabaya, East Java. Production process at PT. The Z fully uses machines that operate 24 hours a day. The bottleneck in the steel plate production process is that there are often breakdowns caused by people, machines, and materials. In the engine factor, there is often a machine breakdown that makes production stop. The smooth running of the production process is disrupted due to damage to the production machine. High downtime often occurs due to repairs and replacement of components in certain machine parts. Therefore the machine needs maintenance / maintenance (maintenance). Among all production machines, rolling mill machines are the machines with the highest downtime rates. The components in the rolling mill machine that cause the highest downtime of 12,851 minutes are roll components. This study intends to make a scheduling plan for roll replacement on rolling mill machines. The methodology used in this study is Preventive Maintenance by calculating its reliability and making a schedule for replacing and maintaining the machine. The results showed that the average roll replacement every 6 days with 63.21% reliability, and the average roll replacement process time was 131 minutes.

This study aims to determine how much influence communication and work knowledge have on employee performance at the Department of Housing and Settlement Areas, Banyumas Regency. The research method used is a quantitative approach with sampling techniques using saturated jampel which is part of non-probability sampling with a total of 46 respondents. Collecting data using a questionnaire with a Likert scale. Data analysis techniques include validity test, reliability test, classical assumption test, multiple linear regression test, t test, and F test. The results of this study show that partially, communication has a positive influence on performance. Partially, knowledge has a positive and insignificant effect on performance. Simultaneously, communication and knowledge have no significant effect on performance

This study uses the Fuzzy Analytical Hierarchy Process (FAHP) method to examine the choice of methanol raw material sources at PT XYZ. The procedure of gathering primary and secondary data for this study entails identifying supplier selection criteria, compiling data on criteria and sub-criteria, and compiling information on supplier performance. Results indicated that product quality, price, supply reliability, sustainability, and reputation were important factors in PT XYZ's decision to choose a certain supplier for its methanol raw materials. The relative weight of each criterion and sub-criteria has been computed using the FAHP approach, which aids in assessing possible providers. Additionally, depending on the obtained priority values, supplier rankings are also established. In conclusion, PT XYZ may choose its raw material suppliers for methanol using the FAHP approach effectively. As well as producing more objective and organized outcomes, this strategy aids in lowering decision-making uncertainty and complexity.

This study aims to determine how much influence work motivation and job satisfaction have on the performance of PT Fasen Creative Quality employees. The research method used is a quantitative method approach with data collection techniques using non-probability sampling with a total sample of 39 employees. Data collection using a questionnaire with a Likert scale unit. Data analysis techniques include validity test, reliability test, classic assumption test, multiple linear regression test, t test, and f test. The results of this study indicate that partially work motivation has a positive effect on employee performance, job satisfaction has a positive effect on employee performance. Simultaneously, motivation and job satisfaction have a positive and significant effect on employee performance

This research aims to analyze the detection and internal control applied in the revenue accounting information system of a café business, as well as the importance of compliance auditing in maintaining the reliability and accuracy of financial data. A good accounting information system is an essential component in managing the revenue of a café business. Effective detection and internal control are highly needed to prevent and detect fraud or errors that may occur in the revenue collection process. This research utilizes a qualitative method with a case study approach on a café business. Data is collected through interviews with café management, direct observation, and analysis of documents related to the revenue accounting information system. The research findings indicate that the café business has implemented several steps of detection and internal control, including task segregation, document verification, the use of automated systems, and periodic reconciliations.

An OTN consists of a set of optical network elements connected by a fiber-optic link. OTN can provide the use of transport, multiplexing, routing, management, supervision and resilience of optical channels. OTN (Optical Transport Network) itself is a technology that can increase network bandwidth and reliability by building network functions into optical networks. . An OTN consists of a set of optical network elements connected by a fiber-optic link.