Publication Search

The Message Queue Telementary Transport (MQTT) protocol is able to adjust the sending and receiving of messages to monitor in accordance with the user's preferences because the sending and receiving of messages is topic based on a specified topic, making it necessary to routinely monitor the condition of patients who have been diagnosed with heart problems from a distance. With the aim to perform a Quality of Service (QoS) analysis with throughput, delay, and packet loss parameters using Unshielded Twisted Pair internet transmission media (UTP) and Wireless, the goal of this research is to design and implement (MQTT) a heart rate monitoring device with an EKG module as a sensor and ESP32 as a microcontroller. On the Ubidots website, EKG signals are transmitted over the internet and shown in real time. QoS analysis is performed using the Wireshark application. Data was collected on two scenarios at intervals of 30 minutes, 1 hour, 2 hours, 5 hours, 8 hours, 12 hours, 18 hours, and 23 hours. The throughput, latency, and packet loss metrics used in this study's results cause different value variations; these are influenced by the weather, internet bandwidth, computer, and router specifications. According to testing, the tool is portable and has a 3000mAh battery, but it has the restriction that it can only be used with reliable internet and bandwidth.

Terrestrial digital television transmitter stations are the main facilities in the transmission of digital television broadcasts to the public. The quality of the transmitted signal is expected to reach the Central Java-1 service area well so as to provide optimal and reliable quality of digital television broadcast performance according to the needs of the community, but currently, complaints about signal problems such as service coverage and reception quality still occur a lot, coverage and signal quality received by community-owned television transmitters cannot be separated from the influence of the quality performance of digital television transmission stations. The purpose of this research is to analyse the coverage performance of digital television services of digital television transmitter stations using the K-Means Clustering Method, identify areas with the best signal coverage and group areas based on the level of signal performance. The data used includes field strength parameters collected through field measurements at 25 service area location points, topography factors and transmitter distance were found to be the main causes of signal quality differences. Data analysis shows that the K-Means Clustering method effectively clusters areas with signal reception quality categories of very good cluster 3 areas, good cluster 8 areas, fair cluster 5 areas and poor cluster 9 areas. The results of this study can be recommended in the evaluation and optimisation of tele-transmitting station networks.

Traditional doors usually consist of a housing or padlock and a flip key to open it. Usually found on office or mall doors, doors can be made more practical. The door will open automatically if there is physical energy (stimulus) that moves it. For example, when someone wants to enter the room, the door will automatically open. Doors like this are designed using automatic control using embedded system equipment. This automatic door system can be designed using automatic control combined with PIR sensors and servo motors. In terms of input equipment, a PIR (Passive Infrared Receiver) sensor is used which will detect humans approaching the door. This PIR sensor will send a signal to the Arduino process unit which contains a microcontroller chip. This microcontroller will send the processed data to the servo motor, so that it can open or close the door automatically.