Publication Search

In this final project the author discusses the problem entitled "Design of Smoke Detector and Room Temperature of SAP ERP Server at PT Apac Inti Corpora". This design aims to support the improvement of the security system in the server room with smoke and temperature detectors and microcontroller-based automatic countermeasures. Against the background of problems with sensors and countermeasures systems in the server room and lack of insight into sensor installation. This tool uses a gas sensor MQ-2 as a smoke detector, a DHT-11 sensor as a temperature detector, Arduino as a microcontroller that controls I/O, buzzer and LED as an alarm, a fan as a temperature controller, and an LCD to display conditions in the room. The output of the MQ-2 and DHT-11 sensors will be processed in a programmed microcontroller so that it can display conditions on the LCD. This tool will turn on the alarm and fan if smoke and high temperature are detected at the specified conditions.

This Research is generally aimed at designing a system that can solve problems at Hotel Oyo Jakarta Selatan. In addition to the use of bathroom tools, there is a need for a gas controller in the bathroom space, especially ammonia gas and other gas in the bathroom. The bathroom control system at Hotel Oyo Jakarta Selatan is currently ineffective, in the use of the bathroom tools to hotel guests and hotel staff. The reseach method used by researcher is The research step begins with research and information gathering, then planning and developing the initial form of the product or system, and field testing the feasibility of the system or product, if there is a revision, it can be developed further before conducting the main field test. . Based on the research results, monitoring ammonia gas in rooms based on a microcontroller can be a solution for the Oyo South Jakarta hotel in monitoring rooms, both from guests or hotel employees more effectively and efficiently , and to facilitate the management of existing bathroom rooms in the Hotel Oyo Jakarta Selatan

The infrared detector (or IR detector) is an optoelectronic component and represents the core element of gas analyzers, flame sensors, devices of spectral analysis, as well as non-contact temperature measurement. pyroelectric infrared detectors work with  stabilization time  in a wide operating temperature range (-55 ... 85) °C, capable of measuring the slightest amounts of infrared radiation (as little as a fraction of a nW) with wavelengths between 1 µm and > 25 µm. The difference of the good pyroelectric or No good (NG) devices shown by graph of voltage offset operating that can check by manual using Digital Multi Meter or semi auto by using microcontroller One of importance measuring of IRD sensors  is Offset Voltage, stabilization of offset voltage indicate the sensor is stable with certain level value. Stabilization value measurement during measuring time means the average value not so much different with fluctuation value.  10 bit ADC on Atmega 328 that main microcontroller on Arduino Uno is capable to measure the Offset Voltage of IRD sensor and check the measurement values is within specification of IRD sensor.