Publication Search

Peristiwa kebakaran merupakan kejadian yang sangat umum terjadi, banyak faktor yang mempengaruhi, di antaranya ialah; hubung pendek arus listrik, kebocoran gas, putung rokok. Kebakaran yang terjadi pasti akan berujung pada kerugian baik itu kerugian materil maupun korban jiwa. Pencegahan sejak dini sangat diperlukan yaitu dengan penerapa sitem pendeteksi kebakaran atau alarm kebakaran. Rancangan alat pendeteksi kebakaran terdiri dari flame sensor sebagai pendeteksi api, sensor MQ-2 sebagai mendeteksi adanya asap dalam ruangan. Serta dilengkapi dengan mikrokontroler Arduino. Berdasarkan kedua sensor indikator kebakaran ini akan ditampilkan melalui LCD dan apabila terjadi kebakaran akan di iringi dengan suara peringatan dari buzzer. Uji coba sistem terlebih dahulu melalui software proteus 8 profesional dengan tujuan membangun suatu alat pendeteksi kebakaran secara otomatis menggunakan flame sensor dan sensor asap MQ2, yang dilengkapi dengan LCD LM016L berbasis mikrokontroller arduino. Hailnya mampu memberikan gambara kepada kalayak umum bagaimana sistem kerja dari alat pendeteksi kebakaran/ alarm kebakaran yang dapat di representasikan memalui software proteus.

The Madukoro gas station is one of the gas stations in Semarang where the payment and refueling systems are still done manually. In general, the manual payment and filling system has many obstacles, resulting in long queues because the service is not fast and effective, also triggering the exchange of counterfeit money because payment uses cash. The application of e-money technology based on microcontrollers is made to make a payment system using electronic money instead of cash that is integrated with fuel filling, this system aims to reduce the long queues that occur and also prevent the amount of counterfeit money circulating at gas stations and make services more fast and easy. The method used in the design of this system is to use the method of Research and Development (R&D) theory from Borg and Gill, starting with gathering information by interviewing Madukoro gas station supervisors and field surveys then designing and developing systems to overcome the problems obtained in research. The system design uses a microcontroller as a data processor that will retrieve data from a database that was previously inputted from the VB.Net application and e-money reader and outputs to instruct the pump to remove fuel from the tank in accordance with the calibration of fuel output per second. As information on the rest of the fuel in the tangka, this tool uses the help of a load sensor that will be displayed on the LCD. In general, this system will make services faster and easier, thereby reducing the number of long queues, but also to avoid the circulation of counterfeit money in gas stations Madukoro, Semarang.

For blind people, assistive devices to carry out daily activities are needed. If you don't use assistive devices, blind people will experience difficulties when carrying out daily activities such as reaching the obstacles that are near them. In designing the system using the Arduino UNO R3 microcontroller board as a controller, five ultrasonic proximity sensors to determine the distance and position from the user to the front and lower obstacles. In addition, the MP3 module and headseat are used as a marker for sound in the form of sound when detecting an object and the SIM800L module is used to send SMS and the GPS module is used to determine coordinates. The validation test shows the value of 31.5 is between 31- 40 which means that it is located in a Very Good (Valid) value. Keywords: Walking Aid, Blind, Ultrasonic Sensor, Microcontroller, Arduino Uno, GPS

This study generally aims to design an information system that can handle problems in putting and sorting goods into warehouses at CV. Sekar Intan KIC Gatsu, Semarang. In terms of using the Information System, CV. Sekar Intan KIC Gatsu, Semarang. In the transfer and sort of goods in the warehouse still using a manual system when the implementation, warehouse employees must take and place the goods to the warehouse that has been determined each - each type of item, so employees must calculate the number of items when the goods take place, here various problems occur, because it requires some HR to manage the warehouse performance process at CV. Sekar Intan. To support the research, researchers used Research and Development (R & D) research methods through the microcontroller-based moving robot design simulation design stages that have been tested by experts declared valid with Valid validity levels and final product development design simulation prototypes carried out. goods transfer robot uses Arduino IDE development software that is integrated with Arduino Mega 2560, 6 pin line sensor, dc motor, motor driver, servo motor, motor driver, lcd, and has been tested in the field by General Adv. Administration and HRD as users / users and stated to be very effective. Based on the results of the research and discussion, it can be concluded that the robot design system developed can overcome the problems in the old system on the CV. Sekar Intan KIC Gatsu Semarang, so as to produce a system that can facilitate work processes and parking processes for employees to be more effective and efficient.

The community's need for electricity is getting higher, so alternative energy sources such as solar heat are needed to replace energy sources from fossil fuels in meeting electricity needs. In this paper we design a two-axis solar tracker with an LDR sensor. A sun tracking system is a unit that is combined into one to control the position of the tracking device with the aim of making the surface of the solar panel module always facing the direction of sunlight. This research discusses the Prototype of the Sun Tracking System in Arduino Based Solar Power Generation Systems to get maximum solar energy. This system will make solar panels move automatically so that sunlight absorption can be maximized. The main control uses Arduino nano which gets input values ​​from the LDR sensor then is processed to the output system. With the control system method can automatically be seen the difference in the results of a fixed solar panel with a solar panel with a tracker, from the comparison we get a solar panel with a tracker to get more optimal results.  

Hydroponics are now increasingly in demand, should be checked regularly so that hydroponic plants thrive. Likewise, in Siliwangi Indah Hydroponics Semarang, which still uses manual methods, namely the absence of a device that detects nutrient water temperature and pH automatically and the absence of tools that can normalize nutrients automatically. Arduino Uno R3 can be used to detect temperature automatically with a temperature sensor DS18B20, and detect pH with a pH sensor. Then the sensor readings are sent to the farmer's cellphone with SMS Gateway. The sensor readings are also used to divert the flow of nutrients from the spare reservoir, so that the nutrients remain normal. So this tool can automatically measure the nutrient water temperature and pH and replace the main nutrients to the reserve nutrients. And the assessment obtained from experts on this tool gets a value of 3.6 and from the expert gets a value of 3.7. Hydroponic nutrition in this study is maintained normally and farmers always know the nutritional state. So that the hydroponic plants thrive and have maximum yields.

Guava is a fruit plant with various benefits for humans. Both the leaves and the fruit can be used to treat various diseases. As an example of the fruit to treat Dengue Hemorrhagic Fever, Tyfus, and so forth. The leaves can be used as traditional medicine to treat cough and diarrhea. In the highlands it is indeed cold and there is little possibility of plantation fires. However, fires can occur as a result of human activity both intentional and unintentional. The location of the plantation land that is relatively far from the residential population makes fires sometimes known too late. Therefore, it is necessary to create a tool to monitor the temperature and concentration of guava plantation smoke from a distance every day so that if the temperature or the density of smoke reaches a certain number that indicates the occurrence of fire then the tool will immediately send a notification via SMS to the plantation owner. In addition, the tool will immediately pour water from the reservoir or water reservoir into the guava plantation. In the water reservoir there is a tool to detect the volume of water. The device to be created uses the LM35 temperature sensor, MQ-2 smoke sensor, HC-SR04 Ultrasonic sensor, Relay, Arduino Uno R3 microcontroller and GPRS Shield along with the GSMSIM Card.

The purpose of this research is to produce tangible results in providing comfort or convenience in turning on or off the night life at home everyday, especially for people who forget to turn off the lights. The method used in making microcontroller-based home lighting control using an android smartphone is. This research method consists of several stages, analysis methods, design methods, implementation testing methods, and maintenance. The results achieved are improving the aspects of comfort and convenience for agencies, where this series of tools works after bluetooth devices are available on android smartphones. connected to a bluetooth module which is connected to the Arduino microcontroller. Basically, the principle of using this tool is that users must be able to operate a smartphone based on the Android operating system. The conclusion of this research is that the Arduino-based light control device using bluetooth can fulfill its function to control the lights properly and the device is designed to be minimalist and safety so it is safe to use.

The purpose of this research is to design goods sorting equipment automatically using ultrasonic sensors, load cell sensors. A valid arduino-based servo motor so that the prototype product sorting device automatically uses ultrasonic sensors and arduino-based load cell sensors can be received by PT Wahana Prestasi Logistik Semarang. The method used in this research is the Research and Development (R&D from Borg and Gall) research method. This research discusses about building a sorting device automatically using ultrasonic sensors, load cell sensors, servo motors, conveyors and arduino. The final product results obtained The prototype product is valid, proven from the ultrasonic sensor, the load cell sensor detects the height of the package, and the weight of the package, the tool will sort the items automatically and know the price to pay, then this prototype product has been declared good and accepted by the user (PT Wahana Semarang Logistics Achievement) through user validation,

A musical instrument is a device created to produce sound. The price of musical instruments themselves varies depending on the type of instrument and the quality of the material used to make the instrument. At NU 07 Brangsong Middle School, there were no instruments except tambourines. That is because there is no funds to buy a musical instrument. The school allocates more funds to buildings or school buildings and scholarship assistance for underprivileged children and intelligent children. Thus students at the school cannot practice or hone their skills in music. From these problems can actually be solved by an arduino-based Piano, Harp, Marching Bell Digital instrument using laser light and LDR. Because this tool can be made at a low cost and can function more than one musical instrument. The working system of this tool is that there are several lasers that will emit light directly on the LDR sensor (in pairs). And when a pair of laser beams and LDR number one are blocked by an object or hand it will emit a piano sound with a "DO" motif. Furthermore, when a pair of laser beams and LDR number two are blocked, it will emit piano sound with the "RE" orientation and so on. This tool is also equipped with buttons that function as a selector of the type of sound that will be generated and the desired octave.

This research generally aims to design a system that can overcome the problem at Wisma Menoreh Sampangan Hotel Semarang. In addition to the process of using bathroom equipment, a gas controller is needed in the bathroom, especially the ammonia and other gas levels in the bathroom . The bathroom control system at the Wisma Menoreh Sampangan Hotel in Semarang is currently considered ineffective, in the use of the bathroom equipment to hotel guests and hotel staff.The research method that I use is a Research and Development (R&D) research method that goes through stages of preliminary studies, planning, product development, testing, product design, product revision, and product testing. This system is made with the Arduino programming language. Based on the analysis, the ammonia gas detector in the Arduino-based bathroom can overcome the existing problems and help the hotel in controlling the bathroom, both to guests and hotel staff effectively and efficiently, as well as making it easier to manage bathroom rooms in the Hotel Wisma Menoreh Sampangan Semarang.