COMPARISON OF VARIATIONS OF ROBUSTA AND ARABIKA COFFEE GROUNDS BY COMPOSITION (60%: 40%, 50%: 50%, 40%: 60%) TO DETERMINE THE HARDNESS AND CALORIFIC VALUE OF BRICKETS

Aprilliano ; Francisko ; Tugur Redationo ; Nereus ; Cristanto Putra Mbulu ; Bernardus
Mechanical, Energy and Material (METAL) 📅 2025 Vol 3, No 1 🔗 DOI: 10.59581/metal.v3i1.121
Abstract
Along with the times, the availability of fossil energy is decreasing, especially natural gas and coal, before using fossil energy, humans have used biomass as an energy source. Indonesia has many plantation commodities, one of which is coffee which is the fourth largest coffee producer in the world. Coffee grounds are the main waste produced by coffee shops and are usually only thrown away. The main ingredients in this study were arabica coffee grounds and robusta. By using robusta composition 60% arabica 40%, robusta 50% arabica 50% robusta 40% arabica 60%. In addition, briquettes are tested for hardness by making points on the surface of the briquettes using a durometer shore A tool of 30 points, then a calorimeter bomb test is carried out to obtain the calorific value content. The result obtained from the highest hardness value is briquettes with a robusta mixture of 50% arabica 50% with a value of 23.7 HA, while the highest calorific value is found in a robusta mixture of 60% arabica 40% with a value of 4526.85 cal / gram.
Keywords
Calorific Value Coffee Grounds Hardness Oven Heating And Sun Violence
How to Cite

Aprilliano, et al. (2025). COMPARISON OF VARIATIONS OF ROBUSTA AND ARABIKA COFFEE GROUNDS BY COMPOSITION (60%: 40%, 50%: 50%, 40%: 60%) TO DETERMINE THE HARDNESS AND CALORIFIC VALUE OF BRICKETS. Mechanical, Energy and Material (METAL), 3(1). https://doi.org/10.59581/metal.v3i1.121

Aprilliano , Francisko; Tugur Redationo, Nereus; Cristanto Putra Mbulu, Bernardus, "COMPARISON OF VARIATIONS OF ROBUSTA AND ARABIKA COFFEE GROUNDS BY COMPOSITION (60%: 40%, 50%: 50%, 40%: 60%) TO DETERMINE THE HARDNESS AND CALORIFIC VALUE OF BRICKETS," Mechanical, Energy and Material (METAL), vol. 3, no. 1, 2025.

Aprilliano , Francisko; Tugur Redationo, Nereus; Cristanto Putra Mbulu, Bernardus. "COMPARISON OF VARIATIONS OF ROBUSTA AND ARABIKA COFFEE GROUNDS BY COMPOSITION (60%: 40%, 50%: 50%, 40%: 60%) TO DETERMINE THE HARDNESS AND CALORIFIC VALUE OF BRICKETS." Mechanical, Energy and Material (METAL), vol. 3, no. 1, 2025.

Aprilliano , Francisko; Tugur Redationo, Nereus; Cristanto Putra Mbulu, Bernardus. "COMPARISON OF VARIATIONS OF ROBUSTA AND ARABIKA COFFEE GROUNDS BY COMPOSITION (60%: 40%, 50%: 50%, 40%: 60%) TO DETERMINE THE HARDNESS AND CALORIFIC VALUE OF BRICKETS." Mechanical, Energy and Material (METAL) 3, no. 1 (2025).

Aprilliano, et al. (2025) 'COMPARISON OF VARIATIONS OF ROBUSTA AND ARABIKA COFFEE GROUNDS BY COMPOSITION (60%: 40%, 50%: 50%, 40%: 60%) TO DETERMINE THE HARDNESS AND CALORIFIC VALUE OF BRICKETS', Mechanical, Energy and Material (METAL), 3(1). doi: 10.59581/metal.v3i1.121.

Aprilliano , Francisko; Tugur Redationo, Nereus; Cristanto Putra Mbulu, Bernardus. COMPARISON OF VARIATIONS OF ROBUSTA AND ARABIKA COFFEE GROUNDS BY COMPOSITION (60%: 40%, 50%: 50%, 40%: 60%) TO DETERMINE THE HARDNESS AND CALORIFIC VALUE OF BRICKETS. Mechanical, Energy and Material (METAL). 2025;3(1).

Artikel Terkait

A SYSTEMATIC LITERATURE REVIEW OF CARBURIZING PROCESSES IN STEELS: DIFFUSION MECHANISMS, PROCESS PARAMETERS, AND SURFACE PERFORMANCE

Audrey, Reinaldo Evan; Putra Mbulu, Bernadus Crisanto; Jalu Permana, Antonius Prisma

THE EFFECT OF VARIATIONS IN INITIAL HEATING TEMPERATURE AND MESH SIZE ON THE HARDNESS VALUE AND CALORIFICATION VALUE OF CANDLECRON SHELL BRIQUETTE

Fortunato D.C.T., Manuel; Crisanto Putra Mbulu, Bernardus; Murdiyanto, Danang

CHARACTERISTICS OF BRIQUETTES FROM COFFEE TREE TRUNK CHARCOAL POWDER: INFLUENCE OF DRYING TEMPERATURE ON BURNING RATE AND CALORIFIC VALUE

Adi Saputra, Yosep; Murdiyanto, Danang; Crisanto Putra Mbulu, Bernardus

EXPERIMENTAL STUDY OF CARBON MEDIA VARIATIONS SEM TEST AND TEMPERATURE ON STAINLESS STEEL 316L PACK CARBURIZING COATING ON THERMAL CONDUCTIVITY AND CORROSION RATE

Odilian Jahu, Reinardi; Tugur Redationo, Nereus; Crisanto Putra Mbulu, Bernardus

EFFECT OF HHVT VALUE OF RAW MATERIALS OF PINE WOOD CHARCOAL AND COFFEE WOOD CHARCOAL (70%:30%, 30%:70% & 50%:50%) WITH MESH SIZES 100 AND 250 ON THE HEALTH VALUE: PENGARUH NILAI HHVT BAHAN BAKU BRIKET ARANG KAYU PINUS DAN ARANG KAYU KOPI (70%:30%, 30%:70% dan 50%:50%) DENGAN UKURAN MESH 100 DAN 250 TERHADAP NILAI KALOR

Kurnia Putra Susanto Nuham, Yosia; Tugur Redationo , Nereus; Crisanto Putra Mbulu, Bernardus

EXPERIMENTAL STUDY OF PACK CARBURIZING AND QUENCHING PROCESS WITH TEMPERATURE VARIATIONS (700℃, 800℃, AND 900℃) ON THE MICRO-CHARACTERISTICS AND HARDNESS OF STAINLESS STEEL 316L

Angger, Daniel; Crisanto Putra Mbulu , Bernardus; Prisma Jalu Permana, Antonius
Tren Sitasi Jurnal