2025 ALUMINUM COATING USING CARBON POWDER WITH TEMPERATURE OF 600°C, 700°C AND 800°C USING HEAT TREATMENT METHOD

Antonius Prisma Jalu Permana ; Nereus Tugur Redationo ; Emilianus Chris Welafubun
Mechanical, Energy and Material (METAL) 📅 2023 Vol 1, No 1 🔗 DOI: 10.59581/metal.v1i1.41
Abstract
Aluminum coating in Indonesia is one of the business fields that has experienced an increase in development and rapid progress starting from the type of coating used to produce coatings that also vary. The purpose of this study was to determine the hot temperatures of 600°C, 700°C and 800°C in the aluminum coating process uses carbon powder and determines the effective hardness values ​​at temperatures of 600°C, 700°C, and 800°C. Test result hardness shows that the highest average hardness value is at a temperature of 600°C of 68.6 Hv and the lowest average hardness value is at a temperature of 800°C which is equal to 51.7 Hv
Keywords
Heat treatment; aluminum; heat; metal plating
How to Cite

Antonius Prisma Jalu Permana, et al. (2023). 2025 ALUMINUM COATING USING CARBON POWDER WITH TEMPERATURE OF 600°C, 700°C AND 800°C USING HEAT TREATMENT METHOD. Mechanical, Energy and Material (METAL), 1(1). https://doi.org/10.59581/metal.v1i1.41

Antonius Prisma Jalu Permana; Nereus Tugur Redationo; Emilianus Chris Welafubun, "2025 ALUMINUM COATING USING CARBON POWDER WITH TEMPERATURE OF 600°C, 700°C AND 800°C USING HEAT TREATMENT METHOD," Mechanical, Energy and Material (METAL), vol. 1, no. 1, 2023.

Antonius Prisma Jalu Permana; Nereus Tugur Redationo; Emilianus Chris Welafubun. "2025 ALUMINUM COATING USING CARBON POWDER WITH TEMPERATURE OF 600°C, 700°C AND 800°C USING HEAT TREATMENT METHOD." Mechanical, Energy and Material (METAL), vol. 1, no. 1, 2023.

Antonius Prisma Jalu Permana; Nereus Tugur Redationo; Emilianus Chris Welafubun. "2025 ALUMINUM COATING USING CARBON POWDER WITH TEMPERATURE OF 600°C, 700°C AND 800°C USING HEAT TREATMENT METHOD." Mechanical, Energy and Material (METAL) 1, no. 1 (2023).

Antonius Prisma Jalu Permana, et al. (2023) '2025 ALUMINUM COATING USING CARBON POWDER WITH TEMPERATURE OF 600°C, 700°C AND 800°C USING HEAT TREATMENT METHOD', Mechanical, Energy and Material (METAL), 1(1). doi: 10.59581/metal.v1i1.41.

Antonius Prisma Jalu Permana; Nereus Tugur Redationo; Emilianus Chris Welafubun. 2025 ALUMINUM COATING USING CARBON POWDER WITH TEMPERATURE OF 600°C, 700°C AND 800°C USING HEAT TREATMENT METHOD. Mechanical, Energy and Material (METAL). 2023;1(1).

Artikel Terkait

EXPERIMENTAL STUDY OF CARBON MEDIA VARIATIONS SEM TEST AND TEMPERATURE ON STAINLESS STEEL 316L PACK CARBURIZING COATING ON THERMAL CONDUCTIVITY AND CORROSION RATE

Odilian Jahu, Reinardi; Tugur Redationo, Nereus; Crisanto Putra Mbulu, Bernardus

EFFECT OF HHVT VALUE OF RAW MATERIALS OF PINE WOOD CHARCOAL AND COFFEE WOOD CHARCOAL (70%:30%, 30%:70% & 50%:50%) WITH MESH SIZES 100 AND 250 ON THE HEALTH VALUE: PENGARUH NILAI HHVT BAHAN BAKU BRIKET ARANG KAYU PINUS DAN ARANG KAYU KOPI (70%:30%, 30%:70% dan 50%:50%) DENGAN UKURAN MESH 100 DAN 250 TERHADAP NILAI KALOR

Kurnia Putra Susanto Nuham, Yosia; Tugur Redationo , Nereus; Crisanto Putra Mbulu, Bernardus

A SYSTEMATIC LITERATURE REVIEW OF CARBURIZING PROCESSES IN STEELS: DIFFUSION MECHANISMS, PROCESS PARAMETERS, AND SURFACE PERFORMANCE

Audrey, Reinaldo Evan; Putra Mbulu, Bernadus Crisanto; Jalu Permana, Antonius Prisma

CHARACTERISTICS OF BRIQUETTES FROM COFFEE TREE TRUNK CHARCOAL POWDER: INFLUENCE OF DRYING TEMPERATURE ON BURNING RATE AND CALORIFIC VALUE

Adi Saputra, Yosep; Murdiyanto, Danang; Crisanto Putra Mbulu, Bernardus

THE EFFECT OF VARIATIONS IN INITIAL HEATING TEMPERATURE AND MESH SIZE ON THE HARDNESS VALUE AND CALORIFICATION VALUE OF CANDLECRON SHELL BRIQUETTE

Fortunato D.C.T., Manuel; Crisanto Putra Mbulu, Bernardus; Murdiyanto, Danang

THE EFFECT OF NACL AND KOH SOLUTION VARIATIONS ON HYDROGEN PRODUCTIVITY AND CORROSIVITY IN WET HHO GENERATORS USING SS316L ELECTRODES

BasunJaya, Akmal Tri; Crisanto Putra Mbulu, Bernardus; Prisma Jalu Permana, Antonius
Tren Sitasi Jurnal