Application of Lean Manufacturing in the Production Process of Sanitary Products to Increase Efficiency (Case Study of a Ceramic Company)

Sudri ; Ni Made ; Hardiyanto ; Mohammad ; Pratiwi Octasylva ; Annuridya Rosyidta ; Salsabila ; Kintan
Jurnal Ilmu Pengetahuan dan Teknologi 📅 2021 Vol 5, No 1 🔗 DOI: 10.31543/jii.v5i1.180
Abstract
Increasing the efficiency of closet products in sanitary ceramic companies by implementing lean manufacturing to increase company competition. The identification of problems found waste in the process of making the closet, namely the dominant waste of inventory (21.81%), overproduction (20.21%), and motion (18.87%). Resolving the types of waste in order to increase the efficiency of the process, the process of mapping tools is carried out to determine the type of tools that are in accordance with the dominant problem, obtained are process activity mapping (PAM) and supply chain response matrix (SCRM). Proposals for improvements that can be made to increase process efficiency are the addition of operator aids for reducing waste motion, drying time efficiency by adding a drying device at the bottom of storage. Inventory waste can be minimized by implementing a warehouse system using the FIFO method and forecasting production targets to handle overproduction. The increase in process cycle efficiency (PCE) was obtained by 3.15%.
How to Cite

Sudri, et al. (2021). Application of Lean Manufacturing in the Production Process of Sanitary Products to Increase Efficiency (Case Study of a Ceramic Company). Jurnal Ilmu Pengetahuan dan Teknologi, 5(1). https://doi.org/10.31543/jii.v5i1.180

Sudri, Ni Made; Hardiyanto, Mohammad; Pratiwi Octasylva, Annuridya Rosyidta; Salsabila, Kintan, "Application of Lean Manufacturing in the Production Process of Sanitary Products to Increase Efficiency (Case Study of a Ceramic Company)," Jurnal Ilmu Pengetahuan dan Teknologi, vol. 5, no. 1, 2021.

Sudri, Ni Made; Hardiyanto, Mohammad; Pratiwi Octasylva, Annuridya Rosyidta; Salsabila, Kintan. "Application of Lean Manufacturing in the Production Process of Sanitary Products to Increase Efficiency (Case Study of a Ceramic Company)." Jurnal Ilmu Pengetahuan dan Teknologi, vol. 5, no. 1, 2021.

Sudri, Ni Made; Hardiyanto, Mohammad; Pratiwi Octasylva, Annuridya Rosyidta; Salsabila, Kintan. "Application of Lean Manufacturing in the Production Process of Sanitary Products to Increase Efficiency (Case Study of a Ceramic Company)." Jurnal Ilmu Pengetahuan dan Teknologi 5, no. 1 (2021).

Sudri, et al. (2021) 'Application of Lean Manufacturing in the Production Process of Sanitary Products to Increase Efficiency (Case Study of a Ceramic Company)', Jurnal Ilmu Pengetahuan dan Teknologi, 5(1). doi: 10.31543/jii.v5i1.180.

Sudri, Ni Made; Hardiyanto, Mohammad; Pratiwi Octasylva, Annuridya Rosyidta; Salsabila, Kintan. Application of Lean Manufacturing in the Production Process of Sanitary Products to Increase Efficiency (Case Study of a Ceramic Company). Jurnal Ilmu Pengetahuan dan Teknologi. 2021;5(1).

Artikel Terkait

Analisis Stabilitas Galian Dalam Menggunakan Contiguous Bored Pile dengan Perkuatan Angkur Berbasis Geo5

Sasikirana, Tiara Danti; Raharja, Danang Setiya

Kalibrasi Instrumen Proses Evaporator sebagai Upaya Menjamin Keselamatan Pengolahan Limbah Radioaktif Cair

Pangestu, Dzulfikri

Pengaruh Penambahan Ekstrak Lidah Buaya terhadap Kualitas Sabun Cuci Piring

Handayani, Sri

Paparan terhadap Materi Partikulat Udara di Instalasi Pengelolaan Limbah Radioaktif

Amellia, Ramadhani

Rancang Bangun Prototipe Ignitor Otomatis Pencegah Bahaya pada Tekanan Balik Aliran Gas Buang Berbasis IoT

JOHANNES, CHERYL

Pengaruh Variasi Beban Indentasi terhadap Nilai Kekerasan Blok Standar Menggunakan Vickers Microhardness Tester

Musyarrofah, Intan Nur; Aisyah, Tita; Sari, Vika Arwida Fanita
Tren Sitasi Jurnal