Identification of building reliability with a forensic audit of the Non Destructive Test method
Experimental analysis was carried out in this study using non-destructive tools on the structural elements of the building being evaluated and providing information in the form of identification of damage from the results of forensic audits at the reviewed OJK Samarinda building.
According to the findings of study utilizing the damage identification technique (forensic audit) employing the NDT instrument in OJK office buildings, the homogeneity of the concrete in the structural elements of the building's beams and columns is good to very good. This is evident from the velocity values found in the concrete pieces. It varies between > 3000 m/s and When the compressive strength of concrete is greater than fc' 28 MPa, the amount of reinforcement in the beam and column elements examined exceeds the reinforcement requirement in the beam and column structural elements of the building, in terms of cracks that occur in the beam and column structural elements. The damage to the architectural components was discovered on the building's walls.
Wahyudi Efendi, et al. (2023). Identification of building reliability with a forensic audit of the Non Destructive Test method. ISAINTEK: Jurnal Informasi, Sains dan Teknologi, 5(02). https://doi.org/10.55606/isaintek.v5i02.54
Wahyudi Efendi, ST., MT., ASEAN Eng., ACPE., Ir. Aco, "Identification of building reliability with a forensic audit of the Non Destructive Test method," ISAINTEK: Jurnal Informasi, Sains dan Teknologi, vol. 5, no. 02, 2023.
Wahyudi Efendi, ST., MT., ASEAN Eng., ACPE., Ir. Aco. "Identification of building reliability with a forensic audit of the Non Destructive Test method." ISAINTEK: Jurnal Informasi, Sains dan Teknologi, vol. 5, no. 02, 2023.
Wahyudi Efendi, ST., MT., ASEAN Eng., ACPE., Ir. Aco. "Identification of building reliability with a forensic audit of the Non Destructive Test method." ISAINTEK: Jurnal Informasi, Sains dan Teknologi 5, no. 02 (2023).
Wahyudi Efendi, et al. (2023) 'Identification of building reliability with a forensic audit of the Non Destructive Test method', ISAINTEK: Jurnal Informasi, Sains dan Teknologi, 5(02). doi: 10.55606/isaintek.v5i02.54.
Wahyudi Efendi, ST., MT., ASEAN Eng., ACPE., Ir. Aco. Identification of building reliability with a forensic audit of the Non Destructive Test method. ISAINTEK: Jurnal Informasi, Sains dan Teknologi. 2023;5(02).
Evaluasi Implementasi Otomasi Proses Dumping Material Panas dan Implikasinya terhadap Strategi B2B pada Industri Kimia
Prasetya, Prita; Handayani, Aniek Sri
The Effect of Demographics on Food Waste Reduction at Food Stall In Banyumas, Indonesia
Simanungkalit, Fany Amelia Putri; Romadlon, Fauzan; Aliyah, Khikmatul
Assesment Schedule Metode Defense Contract Management Agency (DCMA) Menggunakan Software Primavera P6 Studi Kasus Proyek Jembatan
Ranto Tumangger; Agustina, Resti
Strategi Pengembangan Usaha Minyak Goreng Kelapa di LAMPUKITA Fakfak
Andi Patimang
Optimasi Penjadwalan Proyek Perkerasan Jalan Lentur Jalan Konektor POLINELA Menggunakan Critical Path Method berbasis Microsoft Project 2021
Agustina, Resti
Pengaruh Variasi Kandungan Serbuk Karbon Terhadap Karakteristik Mekanik Komposit Polyester Kulit Nunang
Suteja, Suteja; Hidayatullah, Syarif