Analisis Pengendalian Kualitas pada Proses Coating Project Fabrikasi Metal Ducting MBI di PT. Swadaya Graha Menggunakan Metode FMEA

Melanida Agustin ; Akmal Suryadi
Jurnal Kendali Teknik dan Sains 📅 2023 Vol 2, No 1 🔗 DOI: 10.59581/jkts-widyakarya.v2i1.2140
Abstract
. This research was conducted to analyze the quality of the coating process at PT Swadaya Graha using the Failure Mode Effects Analysis (FMEA) method. Primary and secondary data collection was carried out in this research. The research results showed that there were five types of defects, namely polishing marks, orange peel, dustpray, sagging and cracking. Based on the FMEA method, the defect rating is determined based on the resulting cumulative percentage value where the highest value is obtained for orange peel defects at 41.7%. This defect was analyzed and it was found that one of the causal factors was the incorrect application of the spreading rate. This factor is obtained from an RPN value of 120. From this research it can be concluded that the FMEA method can be used as a tool to minimize defects in the coating process and analyze improvements that should be prioritized..
 
 
Keywords
Coating; Defect; Failure Mode Effects Analysis (FMEA)
How to Cite

Melanida Agustin & Akmal Suryadi (2023). Analisis Pengendalian Kualitas pada Proses Coating Project Fabrikasi Metal Ducting MBI di PT. Swadaya Graha Menggunakan Metode FMEA. Jurnal Kendali Teknik dan Sains, 2(1). https://doi.org/10.59581/jkts-widyakarya.v2i1.2140

Melanida Agustin; Akmal Suryadi, "Analisis Pengendalian Kualitas pada Proses Coating Project Fabrikasi Metal Ducting MBI di PT. Swadaya Graha Menggunakan Metode FMEA," Jurnal Kendali Teknik dan Sains, vol. 2, no. 1, 2023.

Melanida Agustin; Akmal Suryadi. "Analisis Pengendalian Kualitas pada Proses Coating Project Fabrikasi Metal Ducting MBI di PT. Swadaya Graha Menggunakan Metode FMEA." Jurnal Kendali Teknik dan Sains, vol. 2, no. 1, 2023.

Melanida Agustin; Akmal Suryadi. "Analisis Pengendalian Kualitas pada Proses Coating Project Fabrikasi Metal Ducting MBI di PT. Swadaya Graha Menggunakan Metode FMEA." Jurnal Kendali Teknik dan Sains 2, no. 1 (2023).

Melanida Agustin & Akmal Suryadi (2023) 'Analisis Pengendalian Kualitas pada Proses Coating Project Fabrikasi Metal Ducting MBI di PT. Swadaya Graha Menggunakan Metode FMEA', Jurnal Kendali Teknik dan Sains, 2(1). doi: 10.59581/jkts-widyakarya.v2i1.2140.

Melanida Agustin; Akmal Suryadi. Analisis Pengendalian Kualitas pada Proses Coating Project Fabrikasi Metal Ducting MBI di PT. Swadaya Graha Menggunakan Metode FMEA. Jurnal Kendali Teknik dan Sains. 2023;2(1).

Artikel Terkait

Penggunaan Buzzer pada Modul GPS Teltonika FMB910 sebagai Indikator Kecepatan di PT Lacak Cipta Aktual

Aldi Bragi Muslim; Mohammad Fatkhurrokhman

Hubungan Minat Kejuruan dengan Kesiapan Memasuki Dunia Kerja Siswa Teknik Kendaraan Ringan Otomotif (Tkro) Smk Negeri 2 Sungai Penuh

M. Hifzon Fadhlika; Hasan Maksum; Irma Yulia Basri; Rifdarmon Rifdarmon

Analisa Penerapan Algoritma Keccak untuk Keamanan Permintaan API

Sofyan Noor Arief; Arief Prasetyo; Thariq Alfa Benriska

Identifikasi Penyakit Lambung Menggunakan Metode Case Based Reasoning Berbasis WEB

Surya Aulia Rahman. S; Ayu Prima Siska; Mardhotillah Mardhotillah

Studi Kasus Integrasi Current Transformer (CT) dan EOCR untuk Pengamanan Arus pada Panel Cooling Tower Pump di PT DongJin Indonesia

Muhammad Dicky Saputra; Mohammad Fatkurrokhman

Analisis Sentimen Publik TikTok dengan Pendekatan Lexicon-Based: Studi Kasus Timnas Indonesia di Piala Dunia 2026

Hamzah Nurrifqi Fakhri Fikrillah; Galih Pratama Herawan Putra; Fikri Chairul Ummam
Tren Sitasi Jurnal