Perbaikan Waktu Set Up Produksi Hot Stamping Foil Menggunakan Metode Single Minute Exchange Of Dies

Sofyan Assauri ; Gunawan Mohammad ; Dwi Retna Sulistyawati ; Muhammad Choiru Zulfa ; Gun Sudiryanto
Manufaktur: Publikasi Sub Rumpun Ilmu Keteknikan I... 📅 2025 Vol 3, No 1 🔗 DOI: 10.61132/manufaktur.v3i1.682
Abstract
All companies hope for an effective and efficient production system, but an imperfect production system means that PT XYZ must improve its production activities. The company strives to produce good products followed by a high level of productivity. In this research, we investigate a case at PT XYZ which produces hot stamping foil in the rewind section. This research found that there was waste that occurred in set-up replacement activities in production. Because it requires a long processing time, we perfected the system by implementing the Single Minute Exchange of Dies (SMED) method, then the process optimized internal activities in the set-up process. The application of the SMED concept is carried out by changing internal activities into external activities with the addition of helpers. This research aims to provide a more effective and efficient set-up replacement process so that machine downtime can be reduced. The results of this research show a 52% reduction in set-up time obtained by adding a helper with a time before implementation of 58 minutes to 30 minutes. This research concludes that SMED is effective in reducing machine set-up time and increasing the efficiency of the production process with benefits after implementing the SMED method by adding a helper of Rp. 10,649,336. In this way, implementing the SMED method helps companies increase production set-up replacement times in the rewind section.
 
Keywords
time efficiency; work quality; set-up time
How to Cite

Sofyan Assauri, et al. (2025). Perbaikan Waktu Set Up Produksi Hot Stamping Foil Menggunakan Metode Single Minute Exchange Of Dies. Manufaktur: Publikasi Sub Rumpun Ilmu Keteknikan Industri, 3(1). https://doi.org/10.61132/manufaktur.v3i1.682

Sofyan Assauri; Gunawan Mohammad; Dwi Retna Sulistyawati; Muhammad Choiru Zulfa; Gun Sudiryanto, "Perbaikan Waktu Set Up Produksi Hot Stamping Foil Menggunakan Metode Single Minute Exchange Of Dies," Manufaktur: Publikasi Sub Rumpun Ilmu Keteknikan Industri, vol. 3, no. 1, 2025.

Sofyan Assauri; Gunawan Mohammad; Dwi Retna Sulistyawati; Muhammad Choiru Zulfa; Gun Sudiryanto. "Perbaikan Waktu Set Up Produksi Hot Stamping Foil Menggunakan Metode Single Minute Exchange Of Dies." Manufaktur: Publikasi Sub Rumpun Ilmu Keteknikan Industri, vol. 3, no. 1, 2025.

Sofyan Assauri; Gunawan Mohammad; Dwi Retna Sulistyawati; Muhammad Choiru Zulfa; Gun Sudiryanto. "Perbaikan Waktu Set Up Produksi Hot Stamping Foil Menggunakan Metode Single Minute Exchange Of Dies." Manufaktur: Publikasi Sub Rumpun Ilmu Keteknikan Industri 3, no. 1 (2025).

Sofyan Assauri, et al. (2025) 'Perbaikan Waktu Set Up Produksi Hot Stamping Foil Menggunakan Metode Single Minute Exchange Of Dies', Manufaktur: Publikasi Sub Rumpun Ilmu Keteknikan Industri, 3(1). doi: 10.61132/manufaktur.v3i1.682.

Sofyan Assauri; Gunawan Mohammad; Dwi Retna Sulistyawati; Muhammad Choiru Zulfa; Gun Sudiryanto. Perbaikan Waktu Set Up Produksi Hot Stamping Foil Menggunakan Metode Single Minute Exchange Of Dies. Manufaktur: Publikasi Sub Rumpun Ilmu Keteknikan Industri. 2025;3(1).

Artikel Terkait

Perencanaan Penggantian dan Perbaikan Komponen Mesin Die Casting Kapasitas 40 Unit/Jam dengan Metode IRRO

Muhammad Yusuf Prayitno; Syamsul Hadi; Bagus Prakoso; David Avelino Anugerah Krishna Pamungkas; Ahmad Zulfa Sibro Malisi

Perencanaan Penggantian Komponen Generator Listrik Daya 2,5 kW

Reza Nandhika Putra Wijaya; Syamsul Hadi; Mochammad Reza Maulana Ramadhon; Bintang Erlangga; Yohan Nur Azizi; Hallan Shandria Rifqi

Implementasi Forecasting Maintenance dalam Pengelolaan Perawatan Dump Truck pada Operasi Pertambangan

Mad Yusup; Diyaa Aaisyah Salmaa Putri Atmaja; Purbawati Purbawati; Ida Rosanti; Tommy Mohammad Chadiq; Mailina Ihya Nashafiyah

Analysis of Hexagonal Head Bolt Production of M10 × 100 mm at a Capacity of 500 Units/Hour

Muhammad Afaq Ahmad Khan; Syamsul Hadi; Ramadhani Rafi Rasheesa; Sulaiman Sulaiman

Pengaruh Implementasi Teknologi Rekayasa Industri terhadap Peningkatan Kapabilitas SDM di Sektor Produksi

Abrar Guntar Damanik; Rendy Purwanto; Rafly Zam Zami Anwar; Abdurrozaq Hasibuan

Centrifugal Pump Maintenance Planning with a Capacity of 650 Liters/Minute for 2026

Adesta Dermawan Wicaksono; Syamsul Hadi; Asset Cahya Wardhana; Ajang Deng Arok; Atem Juacg Kelei Juach
Tren Sitasi Jurnal