Rancang Bangun Battery Charger Menggunakan Solar Panel System Berbasis Internet of Things (IoT)

Dimas Maulana ; Diana Alia ; Akhmad Kasan Gupron
Jupiter: Publikasi Ilmu Keteknikan Industri, Tekni... 📅 2025 Vol 3, No 3 🔗 DOI: 10.61132/jupiter.v3i3.852
Abstract
The aim of this study is to design a battery charging system using solar panels, integrated with an IoT-based monitoring system to improve efficiency and ease of supervision. The system utilizes the photovoltaic effect to convert solar energy into electrical energy, which is then stored in a battery through the regulation of a solar charge controller. The main components in this design include a solar panel, lead-acid battery, ESP32 microcontroller, current and voltage sensors, and the Blynk application for remote monitoring. The research method involves several stages, including the design of hardware such as solar panels, current and voltage sensors, and a step-down regulator, as well as software development using the Blynk platform and ESP32 programming. Test results show that the system is capable of achieving charging efficiencies between 89.45% and 99.57%, with optimal performance under clear weather and maximum sunlight conditions. The IoT system performs well up to a distance of 10–15 meters, with an average data transmission delay of less than 1.5 seconds. Therefore, this device proves to be effective as an independent battery charging and energy monitoring solution in locations without permanent electricity access.
Keywords
Battery Charger; IoT; Monitoring; Renewable Energi; Solar Panel
How to Cite

Dimas Maulana, et al. (2025). Rancang Bangun Battery Charger Menggunakan Solar Panel System Berbasis Internet of Things (IoT). Jupiter: Publikasi Ilmu Keteknikan Industri, Teknik Elektro dan Informatika, 3(3). https://doi.org/10.61132/jupiter.v3i3.852

Dimas Maulana; Diana Alia; Akhmad Kasan Gupron, "Rancang Bangun Battery Charger Menggunakan Solar Panel System Berbasis Internet of Things (IoT)," Jupiter: Publikasi Ilmu Keteknikan Industri, Teknik Elektro dan Informatika, vol. 3, no. 3, 2025.

Dimas Maulana; Diana Alia; Akhmad Kasan Gupron. "Rancang Bangun Battery Charger Menggunakan Solar Panel System Berbasis Internet of Things (IoT)." Jupiter: Publikasi Ilmu Keteknikan Industri, Teknik Elektro dan Informatika, vol. 3, no. 3, 2025.

Dimas Maulana; Diana Alia; Akhmad Kasan Gupron. "Rancang Bangun Battery Charger Menggunakan Solar Panel System Berbasis Internet of Things (IoT)." Jupiter: Publikasi Ilmu Keteknikan Industri, Teknik Elektro dan Informatika 3, no. 3 (2025).

Dimas Maulana, et al. (2025) 'Rancang Bangun Battery Charger Menggunakan Solar Panel System Berbasis Internet of Things (IoT)', Jupiter: Publikasi Ilmu Keteknikan Industri, Teknik Elektro dan Informatika, 3(3). doi: 10.61132/jupiter.v3i3.852.

Dimas Maulana; Diana Alia; Akhmad Kasan Gupron. Rancang Bangun Battery Charger Menggunakan Solar Panel System Berbasis Internet of Things (IoT). Jupiter: Publikasi Ilmu Keteknikan Industri, Teknik Elektro dan Informatika. 2025;3(3).

Artikel Terkait

Analisis Keselamatan dan Kesehatan Kerja (K3) Menggunakan Metode Job Safety Analysis (JSA) dan Hazard and Operability Study (HAZOPS) pada Departemen SDM PT. Micro Madani Institute Cabang Solo

Gessa Sevic Avrilliano; Erna Indriastiningsih; Anita Oktaviana Trisna Devi

Arsitektur Perilaku dalam Perancangan Panti Werdha: Integrasi Pola Aktivitas Lansia, Tingkat Privasi, dan Hubungan Spasial Ruang

Sandi Malik Fajar Jojang; Ernawati Ernawati; Dara Fitriani

Pengukuran Beban Kerja Fisik dan Beban Kerja Mental Karyawan Divisi Pertenunan Menggunakan Metode % Cardiovascular Load (% CVL) dan NASA-TLX di PT XYZ

Anisa Azzahra; Anita Oktaviana Trisna Devi; Agung Widyanto F S

Analisis Desain Pengaduk terhadap Aliran Fluida pada Rancang Bangun Mesin Pencuci Jig di PT UVW

Iman Mujiarto; Wahyu Isti Nugroho; Kaget Wijaya Omar Tadashi; Diana Langgeng Mustikawati

Identifikasi Kecelakaan Kerja Menggunakan Metode JSA (Job Safety Analysis) di PT Kanaan Global Indonesia

Sabrina Salsabila; Erna Indriastiningsih; Anita Oktaviana Trisna Devi

Identifikasi Pemporosan pada Lini Proses Logistik Hotel PYX dengan Value Stream Mapping

I Gusti Agung Mas Putri Anggita; I Made Dwi Budiana Penindra; I Gusti Agung Gangga Tirtayasa
Tren Sitasi Jurnal