Structural Analysis of the Mixed-Use Building of Al-Amin Living Lab and Industrial Park in Sampe Cita Village, Kutalimbaru District

Hendra Fahruddin Siregar ; Dadang Subarna ; Melly Andriana ; M. Ali Tami Purba
International Journal of Mechanical, Electrical an... 📅 2024 Vol 1, No 4 🔗 DOI: 10.61132/ijmecie.v1i4.254
Abstract
A mixed-use building refers to a combination of several different functions within a single structure, such as residential, office, shopping, and recreational functions built on one site. Designing a mixed-use building requires careful planning and consideration of various factors such as functional needs, aesthetics, and energy conservation. Additionally, the design of mixed-use buildings incorporates various functions within a single area. Floor slabs and beams use plain reinforcing steel with a quality of Fy = 240 MPa (Ø8mm). The concrete cover is taken as 20 mm. From the design results, several thickness types of slabs were obtained according to the load requirements that must be accommodated above them. The following are the moments acting on the floor slabs and beams. The reinforcement calculations are performed using the capacity strength design method according to SNI 2847-2019. The capacity design concept involves controlling the formation of plastic hinges at predetermined locations. The SAP2000 program can directly calculate the feasibility of the structural dimensions and the amount of reinforcement needed from the input program results. In the SAP2000 program, the concrete code used is the American concrete code ACI-318-05/IBC 2003, which differs in some respects from the concrete code in Indonesia SNI 2847-2019. Adjustments need to be made to comply with the regulations in Indonesia. Internal forces from the SAP2000 program are selected from load combinations that generate the maximum moments at the column face. The flexural and shear reinforcement for beams can be directly read from the SAP2000 output in the form of information on the required area of reinforcement. 
Keywords
Buildings; Mixed-Use; Building; Living; Lab
How to Cite

Hendra Fahruddin Siregar, et al. (2024). Structural Analysis of the Mixed-Use Building of Al-Amin Living Lab and Industrial Park in Sampe Cita Village, Kutalimbaru District. International Journal of Mechanical, Electrical and Civil Engineering, 1(4). https://doi.org/10.61132/ijmecie.v1i4.254

Hendra Fahruddin Siregar; Dadang Subarna; Melly Andriana; M. Ali Tami Purba, "Structural Analysis of the Mixed-Use Building of Al-Amin Living Lab and Industrial Park in Sampe Cita Village, Kutalimbaru District," International Journal of Mechanical, Electrical and Civil Engineering, vol. 1, no. 4, 2024.

Hendra Fahruddin Siregar; Dadang Subarna; Melly Andriana; M. Ali Tami Purba. "Structural Analysis of the Mixed-Use Building of Al-Amin Living Lab and Industrial Park in Sampe Cita Village, Kutalimbaru District." International Journal of Mechanical, Electrical and Civil Engineering, vol. 1, no. 4, 2024.

Hendra Fahruddin Siregar; Dadang Subarna; Melly Andriana; M. Ali Tami Purba. "Structural Analysis of the Mixed-Use Building of Al-Amin Living Lab and Industrial Park in Sampe Cita Village, Kutalimbaru District." International Journal of Mechanical, Electrical and Civil Engineering 1, no. 4 (2024).

Hendra Fahruddin Siregar, et al. (2024) 'Structural Analysis of the Mixed-Use Building of Al-Amin Living Lab and Industrial Park in Sampe Cita Village, Kutalimbaru District', International Journal of Mechanical, Electrical and Civil Engineering, 1(4). doi: 10.61132/ijmecie.v1i4.254.

Hendra Fahruddin Siregar; Dadang Subarna; Melly Andriana; M. Ali Tami Purba. Structural Analysis of the Mixed-Use Building of Al-Amin Living Lab and Industrial Park in Sampe Cita Village, Kutalimbaru District. International Journal of Mechanical, Electrical and Civil Engineering. 2024;1(4).

Artikel Terkait

Experimental Study of Artificial Coarse Aggregate Materials Made from Fly Ash

Rajiman Rajiman; Ronny Hasudungan Purba; Inggit Anugriyya Netriza

Improvement of the Early, Middle and Final Patrol Check Process From Manual to Digital with the PDCA Method, Fishbone Diagram, and Why-Why Analysis at PT. Automotive Components Company

Chairul Alfatory; Bintang Rafly Aryansyah; Mahendra Mahendra; Andhika Danisvara; Yudi Prastyo

Evaluation of Level Transmitter Performance Through Calibration Data in the Instrument Maintenance Unit of PLTGU Cilego

Muhammad Rizki; Diyajeng Luluk Karlina; Yudi Nugraha

Analysis of Vacuum Pan Automation Performance Using Solenoid Valve at PT. Duta Sugar International

Dafairro Abbil Gunawan; Diyajeng Luluk Karlina

Design of Public Space at Roundout Old City Pulo Brayan, Medan with Sustainable Architecture Approach

Robby Pratama; Melly Andriana; Dara Wisdianti

Differential Pressure Flow Transmitter Type Azbil JTD920S Performance Analysis in Desalination Process at PT Indonesia Power UBP Cilegon

Muhamad Aldi Firdaus; Diyajeng Luluk Karlina; Yudi Nugraha
Tren Sitasi Jurnal