Analisis Pengaruh Tekanan Mesin Exsstruder Terhadap Kuat Tekan Hasil Produk Bata Merah

Irwan Suriaman ; Sendi Ariyandi ; Wawan Wawan ; Ariyandi Ariyandi ; Uus Supriatna
Mars: Jurnal Teknik Mesin, Industri, Elektro Dan I... 📅 2025 Vol 3, No 3 🔗 DOI: 10.61132/mars.v3i3.843
Abstract
This research was conducted to analyze the performance of the extruder machine on the production quantity and quality of bricks. Analysis shows that the engine transmission uses a type B belt with a belt circumference of 1063.622 mm, so the v belt used by the motorbike has a nominal belt number of 41 inches. From the results of the linear regression of red bricks before being burned with a correlation value of 98.7%, it can be categorized as very strong. The linear regression for red bricks before burning is 0.10 while alpha < 0.05 so it can be concluded that there is no significant influence on variables X and Y. The linear regression for red bricks after burning is 0.07 while alpha < 0.05 so It can be concluded that there is no significant influence on variables X and Y.
Keywords
Compressive Strength Analysis Of Red Brick Products; Regression Analysis
How to Cite

Irwan Suriaman, et al. (2025). Analisis Pengaruh Tekanan Mesin Exsstruder Terhadap Kuat Tekan Hasil Produk Bata Merah. Mars: Jurnal Teknik Mesin, Industri, Elektro Dan Ilmu Komputer, 3(3). https://doi.org/10.61132/mars.v3i3.843

Irwan Suriaman; Sendi Ariyandi; Wawan Wawan; Ariyandi Ariyandi; Uus Supriatna, "Analisis Pengaruh Tekanan Mesin Exsstruder Terhadap Kuat Tekan Hasil Produk Bata Merah," Mars: Jurnal Teknik Mesin, Industri, Elektro Dan Ilmu Komputer, vol. 3, no. 3, 2025.

Irwan Suriaman; Sendi Ariyandi; Wawan Wawan; Ariyandi Ariyandi; Uus Supriatna. "Analisis Pengaruh Tekanan Mesin Exsstruder Terhadap Kuat Tekan Hasil Produk Bata Merah." Mars: Jurnal Teknik Mesin, Industri, Elektro Dan Ilmu Komputer, vol. 3, no. 3, 2025.

Irwan Suriaman; Sendi Ariyandi; Wawan Wawan; Ariyandi Ariyandi; Uus Supriatna. "Analisis Pengaruh Tekanan Mesin Exsstruder Terhadap Kuat Tekan Hasil Produk Bata Merah." Mars: Jurnal Teknik Mesin, Industri, Elektro Dan Ilmu Komputer 3, no. 3 (2025).

Irwan Suriaman, et al. (2025) 'Analisis Pengaruh Tekanan Mesin Exsstruder Terhadap Kuat Tekan Hasil Produk Bata Merah', Mars: Jurnal Teknik Mesin, Industri, Elektro Dan Ilmu Komputer, 3(3). doi: 10.61132/mars.v3i3.843.

Irwan Suriaman; Sendi Ariyandi; Wawan Wawan; Ariyandi Ariyandi; Uus Supriatna. Analisis Pengaruh Tekanan Mesin Exsstruder Terhadap Kuat Tekan Hasil Produk Bata Merah. Mars: Jurnal Teknik Mesin, Industri, Elektro Dan Ilmu Komputer. 2025;3(3).

Artikel Terkait

Pembuatan Paku Payung Panjang 50 mm, Diameter 2,5 mm, Tebal Pelat Payung 1,2 mm Kapasitas 300 Biji/Jam

Muhammad Faza Kamil; Syamsul Hadi; Ulil Albab Abdillah; Faiqur Rizal Fajriminallah; Jason Andreas Hudi Prayoga

Analisis Desain Modular Mata Bajak Singkal untuk Meningkatkan Kemudahan Perawatan dan Perbaikan

Gafar, Arvan; Waskito Waskito

Perancangan Website Sistem Penerimaan Peserta Didik Baru MIS Chairul Baryyah Medan Krio dengan Metode Agile

Julia Sinta; Furqan Khalidy; Saiful Amir

Optimasi Kinerja dan Kekuatan Poros Mesin Pencacah Ban Multifungsi Berbasis Metode FEA

Hery Irawan; Raka Noerman Khatami

Analisis Hasil Pencacahan Sampah Rumah Tangga Menggunakan Mesin Depackaging Waste Tipe Hammer Mill Melalui Simulasi CFD-DEM

Hafidh Ihwanul Isro; Arif Rahman Saleh; Nurmala Dyah Fajarningrum

Sistem Informasi Promosi Wisata Desa Pada Eweta Berbasis Web Dengan CodeIgniter

Robertus Umbu Zogara; Cecilia Dai Payon Binti Gabriel; Dian Fransiska Ledi
Tren Sitasi Jurnal