Pengaruh Panjang Serat terhadap Kekuatan Tarik Fiber Metal Laminate Composite

Hanif Arsalan Dani Subekti ; Hilmi Iman Firmansyah
Mars: Jurnal Teknik Mesin, Industri, Elektro Dan I... 📅 2024 Vol 2, No 5 🔗 DOI: 10.61132/mars.v2i5.347
Abstract
This study aims to evaluate the effect of ramie fiber length on the tensile strength of Fiber Metal Laminate (FML) hybrid composites. The background of this research is the saturation with the use of synthetic composite materials, which encourages the search for renewable materials to replace synthetic fibers. In this study, ramie fibers were immersed in a 6% NaOH solution before use, and the composite manufacturing process was carried out using the hand lay-up method. Annealed Aluminum 1100 was used as the laminating layer. The results of the study showed that the highest tensile strength was obtained in composites with a ramie fiber length of 5 cm, with a tensile strength of approximately 105 MPa. These findings indicate the potential of using ramie fibers as a sustainable and efficient alternative in FML hybrid composite applications.
 
 
Keywords
Fiber Metal Laminate; Hybrid Composite; Ramie
How to Cite

Hanif Arsalan Dani Subekti & Hilmi Iman Firmansyah (2024). Pengaruh Panjang Serat terhadap Kekuatan Tarik Fiber Metal Laminate Composite. Mars: Jurnal Teknik Mesin, Industri, Elektro Dan Ilmu Komputer, 2(5). https://doi.org/10.61132/mars.v2i5.347

Hanif Arsalan Dani Subekti; Hilmi Iman Firmansyah, "Pengaruh Panjang Serat terhadap Kekuatan Tarik Fiber Metal Laminate Composite," Mars: Jurnal Teknik Mesin, Industri, Elektro Dan Ilmu Komputer, vol. 2, no. 5, 2024.

Hanif Arsalan Dani Subekti; Hilmi Iman Firmansyah. "Pengaruh Panjang Serat terhadap Kekuatan Tarik Fiber Metal Laminate Composite." Mars: Jurnal Teknik Mesin, Industri, Elektro Dan Ilmu Komputer, vol. 2, no. 5, 2024.

Hanif Arsalan Dani Subekti; Hilmi Iman Firmansyah. "Pengaruh Panjang Serat terhadap Kekuatan Tarik Fiber Metal Laminate Composite." Mars: Jurnal Teknik Mesin, Industri, Elektro Dan Ilmu Komputer 2, no. 5 (2024).

Hanif Arsalan Dani Subekti & Hilmi Iman Firmansyah (2024) 'Pengaruh Panjang Serat terhadap Kekuatan Tarik Fiber Metal Laminate Composite', Mars: Jurnal Teknik Mesin, Industri, Elektro Dan Ilmu Komputer, 2(5). doi: 10.61132/mars.v2i5.347.

Hanif Arsalan Dani Subekti; Hilmi Iman Firmansyah. Pengaruh Panjang Serat terhadap Kekuatan Tarik Fiber Metal Laminate Composite. Mars: Jurnal Teknik Mesin, Industri, Elektro Dan Ilmu Komputer. 2024;2(5).

Artikel Terkait

Pembuatan Paku Payung Panjang 50 mm, Diameter 2,5 mm, Tebal Pelat Payung 1,2 mm Kapasitas 300 Biji/Jam

Muhammad Faza Kamil; Syamsul Hadi; Ulil Albab Abdillah; Faiqur Rizal Fajriminallah; Jason Andreas Hudi Prayoga

Analisis Desain Modular Mata Bajak Singkal untuk Meningkatkan Kemudahan Perawatan dan Perbaikan

Gafar, Arvan; Waskito Waskito

Perancangan Website Sistem Penerimaan Peserta Didik Baru MIS Chairul Baryyah Medan Krio dengan Metode Agile

Julia Sinta; Furqan Khalidy; Saiful Amir

Optimasi Kinerja dan Kekuatan Poros Mesin Pencacah Ban Multifungsi Berbasis Metode FEA

Hery Irawan; Raka Noerman Khatami

Analisis Hasil Pencacahan Sampah Rumah Tangga Menggunakan Mesin Depackaging Waste Tipe Hammer Mill Melalui Simulasi CFD-DEM

Hafidh Ihwanul Isro; Arif Rahman Saleh; Nurmala Dyah Fajarningrum

Sistem Informasi Promosi Wisata Desa Pada Eweta Berbasis Web Dengan CodeIgniter

Robertus Umbu Zogara; Cecilia Dai Payon Binti Gabriel; Dian Fransiska Ledi
Tren Sitasi Jurnal